Press and hold the PAIR button on the back of the remote.

Note: Some instructions are time-sensitive, please read the following instructions before attempting to pair. Step 1: Unplug the base power cord from your power outlet. Wait 1 minute, then plug the power cord back into your power outlet.

Step 1: Unplug the base power cord from your power outlet. Wait 1 minute, then plug the power cord back into your power outlet. Step 2: Remove the cover from the back of the remote control by sliding it down to expose the PAIR button.

Step 3: Remove the cover from the back of the remote control by sliding it down to expose the PAIR button. Step 4: Press and hold down the PAIR button. The PAIR button will illuminate and start flashing.

Pair Your Remote with Your Adjustable Base · Instructions for the following base models: Ease 1.0 | 2.0 · Ergo 1.0 | Ergo Power Base | Ergo Smart Base · Ergo Extend 1.0 | Ergo Extend Smart Base · Step 1 · Locate the Battery Backup Box and press the button TWICE.

Press and hold the PAIR button on the back of the remote.

January 21, 2024 - Instructions for Ease 3.0 models: Remove the rear cover of the remote control by sliding it down to expose the PAIR button. Unplug the Power Cord from your power outlet. Press and hold the PAIR button on the back of the remote. The PAIR button ...

May 21, 2023 - Download Tempur-Pedic EASE 3.0 Manual. Remote Pairing.

When the backlight goes away the remote is now in Child Lock. Pressing any buttons while in Child Lock will yield no movement to your adjustable base. Deactivate Child Lock Press and hold the FOOT UP and FOOT DOWN buttons together for approximately six (6) seconds.

July 23, 2025 - Instructions for pairing the Ease 3.0 remote control with an adjustable base, including a time-sensitive step.

Remote Control arrives paired to the adjustable base.

November 3, 2024 - Definitely make sure the base is unplugged for 2 minutes at least. Then while you're under the base, plug the base back in and when the light blinks on the control box, make sure to press and hold the pair button behind the battery cover on the back the remote for a few seconds.

Open the battery cover by sliding off the back panel downward towards the bottom of the remote. Install three (3) AAA-sized batteries into the remote, matching polarity. Locate the Battery backup box under the bed and press the button TWICE. (Light will illuminate) Remove the cover from the ...

If the adjustable bed remote stops working, first verify all cables are securely connected to the control box. The blue light on the connection box indicates power, while the green light on the cable shows communication status.

August 3, 2025 - 2. Prepare the Remote: Make sure you know the head-up and foot-up buttons on your remote. 3. Press and Hold: Push and hold the blue button along with the head-up and foot-up buttons simultaneously. You should hear three beeps, indicating a ...

We cannot provide a description for this page right now

I would like to know how to reset the remote to see if that resolves the problem. ... To reset your Tempur-Pedic Ease 3.0 remote, follow these steps: 1. Press and hold the FLAT and STOP buttons simultaneously on the remote control for 10-15 seconds. 2. Release the buttons after the specified time.

Pairing the Remote with Your Base: Read Instructions · User Manuals: Ease 2.0 | Ease 3.0 · Unlocking Your Base: Read Instructions · Pairing the Remote with Your Base: Ease 2.0 | Ease 3.0 · Note: If the videos and instructions listed above are not helping you unlock your Ease, Ergo or Extend base, please click here ·