Please ensure that remote(s) have fresh batteries. ... Unplug the base(s) for approximately 60 seconds. Plug the base(s) back ... Press and hold the FLAT button. The LCD window will flash the word Flat. After 15 seconds, the LCD window changes from flashing FLAT to RST.

Step 3: Continue holding the FLAT button for an additional 30-60 seconds as the bed moves forward and backward. If the base is in a raised position, it will lower during this process.

... Remote control unresponsiveness and intermittent signal issues with Tempur-Pedic bed systems. If your Tempur-Pedic bed remote shows lights but doesn’t work, first reset the remote by removing batteries for 5 minutes.

August 3, 2025 - Holding the flat key for about 15 seconds will begin the reset process. Watch for changes on the LCD display, then release the key. How to unlock my Tempurpedic remote?

Backup Box will go out. Release the PAIR button. The remote is now

After resetting the remote, test all the remote functions to see if it is working properly. If the issue persists, you may need to contact Tempur-Pedic customer service for further assistance. They can be reached at 1-800-821-6621 or you can visit their support page at www.tempurpedic.com/support.

If the Tempurpedic adjustable base won’t move but the blue light is on, first ensure the remote’s batteries are fresh and properly installed. Unplug the base for 30 seconds to reset the control box. Check all cable connections between the ...

Replace batteries with fresh, high-quality ones and ensure correct polarity. Reset the remote by removing batteries for 5 minutes. Verify the power supply to the bed base is secure.

When the backlight light goes away, the remote is now in Child Lock. Pressing any buttons while in Child Lock will yield no movement to your

Remote fails to reset and base unit connection issues due to inaccessible wiring or power interruptions. To troubleshoot the Tempurpedic remote reset issue, first ensure all batteries are fresh. Unplug accessible cords from the base to power cycle the system; buzzing indicates partial power.

Step 1: Identify the label on the back of your remote.

Check to see if the tandem toggle feature is enabled. Occasionally the rechargeable Bluetooth remotes will lose connection with your bed, for various reasons, including if you are using the Nightstand app. This is easily restored. First, fully charge the remote by plugging it into the provided USB charger.

If the remote buttons do not impact · the adjustable base movements, please repeat the process · again or call customer service: U.S. 1-800-499-1965 | Canada ... Release the PAIR button. ... The USB charger is configured with 2 connectors, Type-A and Type-C connector. ... Slide side (a) of the Connecting Strap onto leg bolt. Swing the · strap and connect side (b) to the leg bolt.