Hello all! Today we are going to learn how to create custom role separators, much like the ones here!

First off, I'd like to say that the original idea of this came from u/scurry_ on the post that was like this yesterday. Full credit goes to him! (He gave me permission to do this by the way)

Anyways, to start off we are going to create our role, and name it whatever you want. The was I figured out to still keep the color (considering this role is going to be EXTREMELY dark) is to put up arrows on the side as you see in the first image.

Now we are going to use U2063 and EN SpaceTo get U2063, click into the box where it says "Copy and Paste" and do Ctrl/Cmd + A, then copy it

I did not provide an image as it wouldn't help, because there is technically no visibly highlight-able text there.. You will know when you can copy it because your cursor will stop blinking.

To get EN Space, find the "EN Space" dictionary on the right side, then on the left side will be the are you are going to copy

Right below the "-", and to the right of "U+2002" you will drag click in that box, until a little sliver of invisible text becomes highlighted, then copy the highlighted text

Now, for our role. To do this, you want to put the U2063 Separator first, then about 5 En Space after it (can be interchangeable to make the role more centered), then the role, then about 5 more En Space, then one last separator image (also taken from scurry_)

After you do that, set the custom color of the role to #2f3136

Now, if you did the way I did with the arrows pointing up, you will now put the roles that correspond to that separator above the separating role.

After that, go enjoy your new found separators!

I would like to say again!

ALL CREDIT GOES TO u/scurry_ (The commenter that made this post possible) and u/Mejastic (The original post creator)

The original comment was from this post, except that their way was a lot more time/room consuming