Note: Some instructions are time-sensitive, please read the following instructions before attempting to pair. Step 1: Unplug the base power cord from your power outlet. Wait 1 minute, then plug the power cord back into your power outlet.

Press and hold the PAIR button on the back of the remote.

Remote Control arrives paired to the adjustable base.

A one-step process allows you to pair two bases together to control them simultaneously. USB Ports · Charge your devices through the use of 4 USB ports (2 on each side) Headboard Bracket · Hardware to attach an optional headboard is included.

When the backlight goes away the remote is no longer in Child Lock. The remote and adjustable base will work normally. see less Hold down both buttons on the right side ( the foot raise and lower buttons ) for about 5-7 seconds it should flash a few times then it should be released.

If your Zerog EASE bed doesn’t respond despite remote lights, first check the power supply and control box LEDs. Replace remote batteries with fresh ones. Attempt to reset the system by unplugging the power supply for 30 seconds. Look for a small pairing button on the control box; hold it until an LED flashes, then press the remote’s pairing button.

May 21, 2023 - Ensure that the remote control is paired to the bed base. EASE® Adjustable Base: SEALY MATTRESS MANUFACTURING COMPANY, LLC.

Part/Model Number: JLDK.30.03.13 / RF368B EASE BLACK ERGO Adjustable ... Item arrived quickly worked perfectly very happy with my purchase! ... I ordered the RF 368B which is no longer made & was sent the RF399 as a substitute. After trying numerous times, I still cannot get it to pair with the controller. I’m beyond frustrated. Hi there, we’re sorry to hear about the trouble with pairing your RF399 remote.

We cannot provide a description for this page right now

Replacement Tempur-Ergo Ease Wireless Remote Control *PLEASE NOTE: Wireless remote is designed for the Tempur-Ergo Ease 2.0, 3.0 & 4.0 bases only. This will not work with other bases. Click here to identify these specific bases' remotes. If your remote does NOT look this, this replacement remote ...

Step 2: Press and hold the HEAD UP and ZERO-G buttons together for approximately three (3) seconds or until the remote backlight flashes.

If the adjustable bed remote stops working, first verify all cables are securely connected to the control box. The blue light on the connection box indicates power, while the green light on the cable shows communication status.

January 21, 2024 - Instructions for Ease 3.0 models: Remove the rear cover of the remote control by sliding it down to expose the PAIR button. Unplug the Power Cord from your power outlet. Press and hold the PAIR button on the back of the remote. The PAIR button ...

Remote Control arrives paired to the adjustable base.

Open the battery cover by sliding off the back panel downward towards the bottom of the remote. Install three (3) AAA-sized batteries into the remote, matching polarity. Locate the Battery backup box under the bed and press the button TWICE. (Light will illuminate) Remove the cover from the ...

Check each product page for other buying options. Price and other details may vary based on product size and color · Replacement Remote Control Compatible with Sealy Ease Adjustable Bed (Value Silver or Black Remote) · PZL New Replacement Remote Control for Tempurpedic, for Ease Adjustable ...