Hey guys! So I was getting error code 90, and I tried troubleshooting by reseating RAM, using only 1 RAM stick, booting without my GPU, taking out the CMOS battery for a solid hour, and nothing I did would fix the error code, and I would not be able to boot. I then got it RMA'd, and they sent me a replacement, and I booted it for the first time since I got it today, but it still gave me the same error code 90, and nothing I did changed anything. Any help would be really appreciated!
Edit: I ended up just getting it RMA'd and got a replacement board, so everything is all good now. Thank you.
Hey guys! So this is the second time this has happened where my PC won't boot anymore after getting a black screen and losing USB power and displays. Before it would just restart the pc after crashing.
First error 90 happened a week ago and i had to do multiple CMOS reset to get it booting again. Motherboard is dying?
Specs:
ASRock Taichi 570 running on firmware 2.70 with 3950x CPU
RTX 3080
32GB G.Skill Trident Z Neo F4-3600C16D-32GTZNC on XMP profile - never had problems.
All temps are fine.
Thanks for the help.
I recently got an 11th gen i9-11900, but when I put it in my computer, it does not boo and Dr. Debug show code 00. It works with my previous processor (i7-10100), and persists through reseating. I was originally on BIOS 1.3, so I tried updating to 1.9, which seems the be the latest, but it still does not work.
Is there some trick to it that I'm missing, or is the processor I got a dud?
Complete build: https://pcpartpicker.com/user/EightSeven6/saved/#view=B43Qyc (the case, monitor and CPU cooler are incorrect as I couldn't find mine but I think that's irrelevant)
The mildly annoying issue is that I get a hang on POST code 92 every time I turn it on (I have the POST screen turned on so it's shown on screen). Most of the time it sits there for less than 1 second and moves on. When this happens, I only get the normal 1 short mobo speaker beep (yes I installed the mobo speaker).
On rare occasions only, it completely hangs on POST code 92, and it also gives out 1 long mobo speaker beep.
Now according to the ASRock documentation, this is a GPU issue https://www.asrock.com/support/index.asp?cat=Debug:
The graphics card or iGPU could not be recognized. Please clear CMOS and try re-installing the graphics card. If the problem still exists, please try installing the graphics card in other slots or try other graphics cards.
But, I've tried checking PCI-e and power connections and they're both fine. The card and the entire rest of the PC also works splendid otherwise. I also tried plugging in a different end of the power connector from the PSU.
I did not update the BIOS on the mobo because the version I currently have supported my CPU out of the box. I could fetch the version if that's relevant. I didn't update because even though I know how to, I'm scared shitless of doing it because I don't have any sort of backup power in my house and I have no idea if there will be an outage or not (they're quite frequent in my area) and on top, I'm also kind of an idiot, even though I know a lot about PC's.