I prefer hardie. I left a couple pieces laying soaking on my deck over a Canadian winter and then put them back on the house in the spring. A little fragile at first, but now I can't tell which ones they were. Dust is an issue, and installation is big since you can put up full sheets with fewer breaks in the siding. Get a nibbler if dust is a big concern. Answer from Miserable_Warthog_42 on reddit.com
James Hardie
jameshardie.com › product-catalog › trim-products › hardie-trim-batten-boards
Hardie® Trim Batten Boards | James Hardie
Get the beauty of board and batten, in siding and trim that's built to last. ... Hardie® siding is noncombustible—it will not burn.* It resists damage from moisture and holds no appeal for pests like woodpeckers or termites.
James Hardie
jameshardie.com › blog › explore-exterior-design › guide-to-board-and-batten-siding
The Essential Guide to Board and Batten Siding | James Hardie
You’ll be able to choose from a variety of colors and textures to achieve a precise aesthetic that reflects your personal taste. You’ll complete the look with Hardie® Trim Boards batten strips, which are decorative 3/4-inch thick, strips.
Best product for board/batten siding: LP, TruWood, or Hardie?
I prefer hardie. I left a couple pieces laying soaking on my deck over a Canadian winter and then put them back on the house in the spring. A little fragile at first, but now I can't tell which ones they were. Dust is an issue, and installation is big since you can put up full sheets with fewer breaks in the siding. Get a nibbler if dust is a big concern. More on reddit.com
148
108
August 9, 2024James Hardie Board and Batten installation
https://millerdodson.com/wp-content/uploads/2010/11/James-Hardie-Installation-Guide.pdf More on reddit.com
1
1
January 26, 20241/2 Foam Board Behind Hardie Plank Board and Batten Siding?
Go for the gold and do 2” XPS. You’ll just need to have windows and doors recessed a little because of the depth. More on reddit.com
13
4
November 2, 2022Should James Hardie Board And Batten Siding be Caulked?
I was just about to snap with the “google exists” comment, but damn Hardie sure does hide their install sheets deep in their website. For anyone wondering, EVERY manufacturer has readily available spec sheets to answer these kind of questions, the other two comments in this thread are incorrect. Caulk is NOT required on the battens. And best to follow manufacturer instructions whenever possible. https://www.jameshardiepros.com/getattachment/2510b556-ee39-416d-8ef7-198c698f4cc7/hardiepanel-single-family-hz10-us-en.pdf . Either they started and realized they didn’t have to, or some followed the instructions while others went “above and beyond”… In a few years you may appreciate the lack of caulk, the color matched caulk and paint touch up kits tend to sun fade a bit faster than the pre-finished siding. More on reddit.com
6
2
December 14, 2022Videos
28:40
This Siding Upgrade Will Save Me Thousands $$ in the Future || ...
13:23
James Hardie Board & Batten SECRETS - YouTube
15:52
5 Things To Know BEFORE Installing Board & Batten Siding! - YouTube
01:05
Installing Hardie Board & Batten - YouTube
21:50
Pole Barn Build on a Budget | Board & Batten Siding - Fiber Cement ...
Lowe's
lowes.com › collections › James-Hardie-Arctic-White-Board-and-Batten-Siding-Home-HZ10 › GR_11963
Shop James Hardie Arctic White Board and Batten Siding Home HZ10 at Lowes.com
James Hardie Statement Collection HZ10 Arctic White Fiber Cement Trim Smooth 0.75-in x 2.5-in x 144-in ... Achieve the Modern Farmhouse look with Board and Batten siding using Hardie Panel Siding with Hardie Trim Batten strips.
Colonialmaterials
colonialmaterials.com › product › JHI216031
3/4 in x 2 1/2 in x 12 ft JamesHardie HardieTrim Batten Board / Smooth- Primed
Home Drywall Specialty 3/4 in x 2 1/2 in x 12 ft JamesHardie HardieTrim Batten Board / Smooth- Primed
Builders Warehouse
builderswarehouse.com › home › james hardie hardietrim fiber cement batten boards
James Hardie HardieTrim Fiber Cement Batten Boards
James Hardie HardieTrim Fiber Cement Batten Boards
This product is rated HardieZone 5 (HZ5). · HZ5 materials are approved in HZ5 & HZ10 weather zones.
James Hardie HardieTrim Fiber Cement Batten Boards 1pc
James Hardie HardieTrim Fiber Cement gives the traditional board and batten look a contemporary twist. In one of our ColorPlus Technology finishes, it makes a more brilliant impact. Also primed for paint. See
Thickness: 0.75" Width: 2.5" Length: 12'
"Related Products" for color / size options other than this order, or use "Search" for an even wider range of possibilities.
Price $9.50
Allstarwindowsiding
allstarwindowsiding.com › home › the essential guide to james hardie board and batten siding
The Essential Guide to James Hardie Board and Batten Siding
October 6, 2025 - Here we break down how the system works, the benefits of using James Hardie materials, what the average project costs, and how we install it the right way. Board and batten is a vertical siding look. Wide panels form the main surface.
Carpsomaha
carpsomaha.com › james-hardie-board-batten
James Hardie Board and Batten Siding: Product, Cost & Comparison
October 1, 2025 - Board and batten is a vertical siding style where wide boards are installed side by side and narrow battens are placed over the seams. It creates a strong visual pattern and adds dimension to exterior walls.
Reddit
reddit.com › r/carpentry › best product for board/batten siding: lp, truwood, or hardie?
r/Carpentry on Reddit: Best product for board/batten siding: LP, TruWood, or Hardie?
August 9, 2024 -
Need to side my 12x16’ studio I’ve built myself. Applying on top of zip panels. Want a board and batten style.
I can’t find smooth LP panels, only textured. Though I’m told they’re available by some.
One place tells me they sell TruWood panels that are smooth, but I can’t find anything on TruWood’s website that says they offer it.
Then there’s Hardie Panels. I love the look but the increased cost, difficulty in pickup and installation (I,e., cant do it myself), and the dust makes me hesitant.
Can anyone help point me in the right direction? I have an 8’ rear wall and a lean to roof leading to a 10’ front wall if that’s important.
Top answer 1 of 58
44
I prefer hardie. I left a couple pieces laying soaking on my deck over a Canadian winter and then put them back on the house in the spring. A little fragile at first, but now I can't tell which ones they were. Dust is an issue, and installation is big since you can put up full sheets with fewer breaks in the siding. Get a nibbler if dust is a big concern.
2 of 58
36
Fiber cement is no question the most durable siding product of this type. It's a bitch to work with however. My current project is smooth Hardie board and batt and the 10ft sheets used for most of the build weigh over 100 lbs a piece and they're only 5/16ths thick. And they break if you look at them funny which is probably the most difficult aspect of it As long as you wear a respirator while cutting it you're fine. Even an N95 is good enough if you ask me
James Hardie
jameshardie.com › installation-instructions-technical-docs
Installation Guidance | James Hardie
Find the technical documentation you need to build your James Hardie project from start to finish.
James Hardie
jameshardie.com › product-catalog › exterior-siding-products › hardie-panel-siding
Hardie® Panel Siding | James Hardie
Give your home exterior a fresh look with vertical panel siding available in a range of styles and textures. When combined with Hardie® Trim Batten boards, you'll achieve the rustic board-and-batten look that defines the modern farmhouse.
James Hardie
jameshardie.ca › products › hardiepanel-vertical-siding
House Siding Options & Types | James Hardie
Ready for real inspiration? Browse the photos below to see James Hardie's array of exterior solutions on real homes.
Previewconstruction
previewconstruction.com › vertical-fiber-cement-siding-board-batten-from-james-hardie
Vertical Siding (Board & Batten) | James Hardie®
April 19, 2022 - It is composed of long flat boards overlapping each other (hence the name lap siding). ... Preview Construction comes highly recommended as one of the commercial fiber cement siding installers in Texas. Vertical fiber cement siding from James Hardie® creates tall, clean lines. It will make your home appear larger than it really is and vertical siding can be a great way to add architectural detail.
Call 214-348-3836
Address 1513 S Tennessee St Ste 147, 75069, McKinney
Cloudfront
d3ciwvs59ifrt8.cloudfront.net › 8a1708a4-7c60-43c4-9b0c-456c09cd1f90 › 077ed213-dbdc-4dec-8ca1-c3333fba8eea.pdf pdf
HardieTrim Batten Installation Inst_HZ_1 - Cloudfront.net
• When installing James Hardie products all clearance details in figs. 2,3,4,5,6,7,&8 must be followed. • Flashing is required over all horizontal protruding and exposed trim. • Adjacent finished grade must slope away from the building in accordance with local building codes - typically a minimum of 6" in the first 10'. • DO NOT install HardieTrim Battens, such that they may remain in contact with standing water.
J&W Lumber
jwlumber.com › wp-content › uploads › 2020 › 10 › hardietrim-hz5-ca-en.pdf pdf
30 HardieTrim® Boards Products Description HardieTrim
In addition to frieze, rake, window, door, and corner details, 5/4, 4/4 HardieTrim boards · may be used to construct light blocks, column wraps and decorative scroll work. Available in commonly-used nominal ... in.) thick, 64mm (2½ in.) wide, and come on 3,658mm (12’) lengths. See your local dealer for details and availability of ... Close-up on trim products. ... Board & Batten look.
Buildsite
buildsite.com › pdf › jameshardie › HardiePanel-Vertical-Siding-Product-Data-1987160.pdf pdf
General Product Information Tools for Cutting and Fastening General
James Hardie products. ... No. 11ga 1.25 in long ... Ribbed Bugle-Head No. 8 (.323 in. x 1 in.) ... Panels are butted together lightly. ... Primed panels. Not all designs will be suitable for every application: • Exposed fasteners or battens is the recommended application for ColorPlus products
YouTube
youtube.com › watch
Hardie Board and Batt Siding Installation - YouTube
View Blog Post: https://freemansconstruction.com/hardie-siding-installation-ramona-californiaMany steps go into Hardie siding installation. We're here to exp...
Published April 6, 2023
City of Detroit
detroitmi.gov › sites › detroitmi.localhost › files › hdc-submitted-materials › 2020-07 › James Hardie General Installation Requirements.pdf pdf
James Hardie General Installation Requirements
Please turn on javascript to use this feature. Thanks · Mayor, Council, Clerk and Commissioners take oath of office during formal ceremony
Reddit
reddit.com › r/fixerupper › james hardie board and batten installation
r/FixerUpper on Reddit: James Hardie Board and Batten installation
January 26, 2024 -
I want to install fiber cement boards over brick (I live on sand and the shifting creates cracks so I want to just cover it. House is a bungalow built in the 50's). I have spoken to a few installers that have told me it can be done but the quotes are extremely high. I have access to two extremely handy men who have done most of our house renos. They are capable of doing the installation but would love some guidance. Can anyone be kind enough to provide me with details on how to go about installing it properly. I have these cement ledges under the windows as well. What would be the best way to tackle those? Chip them off, just wrap the flashing over them, etc? Any tips and tricks or perhaps any alternative solutions/recommendations are appreciated. I have read a few posts that caution against using the boards because of their weight. Is this something I should be worried about? Thank you!
Millerdodson
millerdodson.com › wp-content › uploads › 2010 › 11 › James-Hardie-Installation-Guide.pdf pdf
James Hardie Installation Guide
Miller Dodson Associates, Inc. is one of the leading firms in the Reserve Study field, serving community associations, resorts, country clubs and golf courses, religious institutions, and educational facilities.
YouTube
youtube.com › watch
5 Things To Know BEFORE Installing Board & Batten Siding! - YouTube
I've partnered with Upstryve to help in the process of getting my contractors license in the state of Oregon. They've got a ton of learning resources and can...
Published August 13, 2021