I've been putting together a computer for the first time today, and I've ran into a big issue. My motherboard is a z390 taichi from asrock, and my cpu is a 9900kf. When powering on, the fans spin, the watercooler starts pumping, and the lights turn on, but doesn't post and spits out the error code 00 on Dr Debug.
According to the motherboard manual, 00 means a cpu problem, and advises to check the cpu and reset the cmos. I've taken the cpu out and put it back in twice, it can't possibly be wrongly installed. The arrow is lined up, and its very snug over the socket. I've just been taking the cmos battery out every time to reset it, so it can't be that.
I'm reusing storage drives from my old, prebuilt computer, that ran on a gigabyte made x370 chipset. I don't really understand drivers and the software side, but is that possibly the problem? It has windows 10, but gigabyte drivers for an amd board, and I'm not sure if that would be a problem.
https://imgur.com/gallery/IAd9F14
I've plugged the cpu power cable in and out of the motherboard, no luck. I put the powercable in a different cpu socket on my psu, still no luck. I'm at a loss for what I fucked up here.
No POST, dr. debug code 00
Dr. Debug Code 00 on Asrock 970 Extreme4
ASTROCK X670-E TAICHI CARRARA STUCK AT 00 DR DEBUG / POST CODE
How to fix CPU CODE: 00 ? - Republic of Gamers Forum - 768498
I'm trying to build a new PC, bought all new parts. I choose an Asrock X670-E Taichi Carrara as my motherboard, but the PC will not start and it shows code 00 on DR. Debug. Never worked, completely new build with a new Ryzen 7800X3D CPU. What I tried so far:
1 - Bios flash back to versions 1.28, 1.24 and 1.04, all show the same error
2 - Tested the PSU on another PC, it works fine
3 - Tried with memory, and without memory, with cooler and without cooler
4 - CMOS reset
Nothing works still stuck at 00, PC won't boot or show anything. What else can I try? I'm thinking about asking for RMA.
Full list of components is:
PSU: Super flower leadex III 850W
CPU: Ryzen 7 7800X3D
MEMORY: 2X 16GB CORSAIR VEGEANCE DDR5
VGA: RTX 3070
But for now I'm trying with just PSU, MB and CPU. It should at least progress from 00 to another code.
Here is 2 photos of it. Testing with bios 1.28:
Please can someone help? I'm very frusted and sad with all this situation.
Yesterday I tried setting PBO through Ryzen Master. Not sure what I exactly did but it started to run a PBO optimizer which runs for about 40 min. Everything was working great temps were low nothing higher than 70c. I went to walk my dog and came back to a black screen and error code 00. It has happened before but I just shut it off a used the Clear CMOS which helped it boot back on. But now It won't post and All I have a is black screen, fans working everything powers on just that dreaded 00 code. I just put in my new 7800x3d CPU Friday.
Not sure what is going on anyone ever had this happen?