To Deactivate Child Lock: Step 1: Press and hold the FOOT UP and FOOT DOWN buttons together for approximately six (6) seconds, or until the remote backlight flashes twice. Step 2: When t...

To Deactivate Child Lock: Step 1: Press and hold the HEAD DOWN and ZERO-G buttons together for approximately three (3) seconds. Step 2: Press and hold the HEAD UP and ZERO-G buttons togeth...

Note: If you have received a replacement remote for your Ease 3.0 base, please visit this link for the Child Lock instructions.To Deactivate Child Lock:Step 1: Press and hold the HEAD DOWN and FOOT...

When the backlight goes away the remote is no longer in Child Lock. The remote and adjustable base will work normally. see less Hold down both buttons on the right side ( the foot raise and lower buttons ) for about 5-7 seconds it should flash a few times then it should be released.

To Deactivate Child Lock: Step 1: Press and hold the HEAD DOWN and FOOT DOWN buttons together for approximately three (3) seconds. Step 2: Then hold HEAD UP and FOOT UP for approximately t...

To Deactivate Child Lock: Step 1: Press and hold the HEAD DOWN and ZERO-G buttons together for approximately three (3) seconds. Step 2: Press and hold the HEAD UP and ZERO-G buttons togeth...

January 21, 2024 - To disable child lock: Press and hold the FOOT UP and FOOT DOWN buttons together for approximately three (3) seconds. The remote backlight will flash twice. When the backlight goes away the remote is no longer in Child Lock.

November 3, 2024 - I think the old way was hold feet up and down for about 6 or 7 sec until the backflight flashes and stops. The new way is to press and hold head up and head down for about 6 seconds till it flashes, then do same on feet - feet up and feet down for 3 sec until it flashes.

My Roku remote has stopped working. I’ve checked. With new batteries as well · Will the delivery men set up my new adjustable bed and be sure it works? I purchased a Beauty rest adjustable bed to be ... Ok. Disregard. It was on child lock. I had wrong combo on remote.

Step 2: Next, hold the HEAD UP and FOOT UP buttons for approximately three (3) seconds, or until the remote backlight flashes twice. Step 3: When the backlight turns off, the remote is no longer in Child Lock mode, and both the remote and adjustable ...

To activate the child safety lock feature, press and hold the HEAD UP and HEAD DOWN buttons together for approximately 6 seconds. The remote backlight will flash twice. When the backlight goes away, the remote is now in Child Lock.

October 29, 2018 - Plug bed base into a different electrical outlet, or test current outlet with another working appliance (a grounded, electrical surge protector is ... Ensure that your remote batteries are properly installed or do not need replacing.

If the remote control is unresponsive, first verify if the child lock feature is enabled on the receiver, which disables remote input. Disable child lock via the receiver’s settings menu or physical button.

NOTE: For optimal performance, please return the bed to its flat position before selecting the Zero Gravity preset. ... ZERO-G buttons together for 3 seconds. The remote LED backlight will flash. When it stops flashing, the remote is now in Child Lock—pressing any buttons while in Child Lock ...