To anyone still using the Fresco Logic Drivers with Windows 10
Fresco Logic 3.0 USB
USB driver update recommended for Fresco Logic expansion card
You can get the Fresco Logic drivers here:
https://support.zoho.com/portal/frescologic/home (USB 3.0 Host Driver (FL1000, FL1009, FL1100) v3.6.8.0)
But beware, I have had the best experience with the windows 10 drivers. I got two scenarios:
-
Installed an older fresco logic driver from the Inateck website -> Got bluescreens after reboot
-
Installed the latest driver from fresco logic website (the one from the link) -> Worked flawlessly at first, but made my rift shut off for a few seconds now and then.
Went back to windows 10 drivers: Everything worked again as expected.
More on reddit.comFresco Logic 3.0 USB
Videos
Hi RenéBravo
Greetings! I am Vijay, an Independent Advisor. I am here to work with you on this problem.
What is the exact issue which you get? Any screenshot?
Hi Rene,
If the driver from the cards installation disc (if the card is/was an add-on) or if the driver from the Fresco site was downloaded and installed, completely uninstall all of those (these drivers are basically for Win 7/Vista/XP support) then restart the PC and let Windows update install the driver(s) that it likes.
The add-on cards (in my case an Inatech 7 Ports PCI-E to USB 3.0 Expansion Card installed in Feb. 2016) that use the Fresco Logic (FL1100) chipset were always plug-n-play with Windows 10 with the best results. (Those that mistakenly installed the old drivers had problems).
Or, if you are referring to (using) the FL2000 USB 3.0 Display device controller then also refer to the links below:
https://support.frescologic.com/portal/home
https://support.frescologic.com/portal/kb/articles/fl2000-recommended-usb-3-0-xhci-host
https://support.frescologic.com/portal/kb/fresco-logic/faq/vga
Hope this helps,
-Richard
I purchased the Oculus recommended Fresco Logic USB expansion card and installed it into my PC. It's not supposed to require any external drivers with the included Windows 10 drivers being sufficient. Oculus Home however is complaining with "USB driver update recommended".
I've searched and cannot find any drivers to update to. Is anybody else getting this warning?
You can get the Fresco Logic drivers here:
https://support.zoho.com/portal/frescologic/home (USB 3.0 Host Driver (FL1000, FL1009, FL1100) v3.6.8.0)
But beware, I have had the best experience with the windows 10 drivers. I got two scenarios:
-
Installed an older fresco logic driver from the Inateck website -> Got bluescreens after reboot
-
Installed the latest driver from fresco logic website (the one from the link) -> Worked flawlessly at first, but made my rift shut off for a few seconds now and then.
Went back to windows 10 drivers: Everything worked again as expected.
Don't do it. The new drivers didn't work right with my CV1 and I had to roll them back.