i have my machine fixed now !!! i had to re-solder the PCH thanks for all the help here friends, and THANKS DELL for the design flaw ... the pch temperatures reach 100°C when you are gaming Answer from judal7837 on dell.com
Reddit
reddit.com › r/alienware › area 51 r4 pc has 2 beep codes
r/Alienware on Reddit: Area 51 R4 PC has 2 beep codes
July 21, 2024 -
After a change to the coin cell battery that fixed my PC for a couple of days, my PC now has 2 beep error codes.
When I start my PC it beeps twice in intervals. From Dell’s website it shows that it means no RAM detected.
I reseated the RAM and even tested them all individually.
Does anyone know what the problem is? Do I need to purchase new RAM? Do I need to buy I new motherboard?
Hopefully neither of these are the issue as I’m preferably looking for a free or cheap fix. I cant afford a repair at the moment. Thanks in advance for any help!
Top answer 1 of 2
1
It would be unlikely that all of your RAM modules failed simultaneously, Try clearing CMOS by disconnecting power, removing your brand new CR2032 coin cell battery, hold in the power button for 30 seconds, put the battery back in, connect power, and see if she will boot.
2 of 2
1
Did you try the ram individually in different slots though? I know you tried individually but did you move to different slot incase the slot you are testing on is bad? I highly doubt a set of ram went bad at same time. New? I have had new sets be bad. I have yet to have a pair die in use at same time. Could be cpu, motherboard, bad powersupply not applying voltages at right spot and it thinks it is a ram failure.
My alienware is making a 3,2,1 beep when i start it. I do
My Alienware Aurora won't boot. The power light comes on, then nothing, no beeps or anything. About 3 days. Windows 11. ... I have an Dell alienware gaming laptop and when I start it it just has a blank screen and squeals at me... More on justanswer.com
0
December 14, 2024Anyone knows what’s wrong with it, the screen doesn’t turn up and the laptop is making beeps. That’s it rip?
It's a beep code. Sounds like there may be more than one beep code here: 2 beeps pause, one beep pause, five beat (three repeats), 3 beeps, etc. Search for the beep code legend/table for your Alienware model. It could be something simple like a dead CMOS battery, RAM error or a loose motherboard connector...
More on reddit.com 24
58
March 8, 2021Alienware x51 r2 undetected RAM beeping
A few weeks ago, my computer (x51 r2) started crashing and beeping one time repeatedly after I turned it off and then on. I watched videos of people having the same problem. Some of the comments of... More on dell.com
3
0
July 7, 2017Help - 3 2 1 beep code
So, one month has passed and I received the display cable from Aliexpress. I replaced the damn thing (Not fun, but doable) and to my surprise it worked! The laptop and the display turns on and boots into Windows. If anyone else has this problem, do try and replace the cable before replacing the motherboard\giving up, for me at least it saved the entire laptop. More on reddit.com
4
4
September 27, 2020Dell
dell.com › dell community › laptops › locked topics – alienware general
Alienware m17x Beeps 2 Times when Starting up Plugged in | DELL Technologies
January 26, 2012 - Hey, The beeps are a code to tell ... RAM Not detected this could either be simply that a piece of ram has failed or all of your ram has failed or Your ram slots are faulty in which case you would need a new motherboa...
Dell
dell.com › dell community › laptops › locked topics – alienware general
x51 2 beeps and won't start up | DELL Technologies
July 7, 2017 - Yes definitely 2 beeping codes are related to a memory failure; I would recommend you to try one memory at the time on all the slots and let me know if the system is capable of boot with any on them.
iFixit
ifixit.com › Answers › View › 773964 › Dell+Alienware+Beep+7+times+while+booting+(no+display)
Dell Alienware Beep 7 times while booting (no display) - Alienware 17 R2 - iFixit
March 15, 2023 - then i thought the new pch is faulty, so i replace it with the old one, sadly the beeps still there. i bought 2 new PCH (each from a different supplier) and the problem still persist. i make sure that the PCH replacement is good, i use BGA rework station with 220C, i remove the solder on the pad with solder wick, and give small amount of flux to put the new one. at this point, im sure that the PCH is not the problem, from dell website, 7 beeps code means the problem is around the CPU or could be something else.
JustAnswer
justanswer.com › laptop › qswfl-alienware-making-3-2-1-beep-when-start-it.html
My alienware is making a 3,2,1 beep when i start it. I do not know. The keyboard makes colors, screen does not display.
December 14, 2024 - No display on startup and beep codes indicating hardware errors are common in Alienware models. A 3-2-1 beep code on Alienware typically signals a memory or motherboard issue. First, reseat the RAM modules to ensure proper contact.
Dell
dell.com › support › manuals › en-sa › alienware-aurora-r12-desktop › alienware-aurora-r12-meandmydell › beep-codes
Me and My Dell For Inspiron, G-Series, XPS, and Alienware computers | Dell Saudi Arabia
Your computer may emit a series of beeps during start-up if there are errors or problems. This series of beeps, called a beep code, identifies a problem.
Reddit
reddit.com › r/alienware › anyone knows what’s wrong with it, the screen doesn’t turn up and the laptop is making beeps. that’s it rip?
r/Alienware on Reddit: Anyone knows what’s wrong with it, the screen doesn’t turn up and the laptop is making beeps. That’s it rip?
March 8, 2021 - Welcome to the unofficial community for Alienware. We are not an official Dell sub. Please read the rules and FAQ before posting. Thanks! ... Archived post. New comments cannot be posted and votes cannot be cast. Share ... It's a beep code. Sounds like there may be more than one beep code here: 2 beeps pause, one beep pause, five beat (three repeats), 3 beeps, etc.
Dell
dell.com › support › kbdoc › en-us › 000124349 › understanding-beep-codes-on-a-dell-desktop-pc
Understanding Beep Codes on a Dell Desktops | Dell US
NOTE: Starting from the D4 generation of OptiPlex models onwards (that is 7010/9010/9010 AIO), the beep codes are eliminated, replaced by a single memory error pattern. Now only no memory failure conditions generate the beep code, the beep pattern is 1-3-2 (one beep, then three beeps, then two beeps).
Top answer 1 of 3
1
usually as said no ram detected... usually that says board is still functional .. closing the clips wont harm anything that I ever heard off ... remove the ram and reseat them, they will go in and click with a bit of force make sure they go in proper way as they only go one way , you can also try just 1 stick then the other stick on its own to see of it boots... you can try booting with the cd drive disconnected and side panel off it wont cause any issue for testing purposes..
2 of 3
0
I finally got it to work. It was a simple mistake. It turns out that the RAM stick was facing the wrong way. I didnt understand because all the videos I watched about uprgrading the RAM on the x51 had the sticker side facing away from the fan. I'm terribly sorry for freaking out when it was a simple solution.
Dell
dell.com › support › kbdoc › en-us › 000132041 › understanding-beep-codes-on-a-dell-notebook-pc
Understanding Beep Codes on a Dell Laptops | Dell US
Three means 3-3-3-3…That is three beeps and three beeps and…: Endless looping until the user presses the power button to shut down the computer.
Reddit
reddit.com › r/alienware › help - 3 2 1 beep code
r/Alienware on Reddit: Help - 3 2 1 beep code
September 27, 2020 -
My sister has an Alienware 17R5 (8750H 1070) and one of the fans on her laptop started making an annoying grinding noise. We opened it, cleaned the fan, and closed it up. Problem is, it now wont POST and it makes 3 beeps, followed by 2, then 1, and repeat.
From what I could find this means a disconnected/faulty LCD. We did disconnect the 40 pin cable so we could disconnect the motherboard, but it dosent seem damaged and we tried resitting it a few times with no success.
Does anyone have an idea would could be wrong? is there another cable I should check that may be the cause of this beep code?
Thanks.
Top answer 1 of 3
2
So, one month has passed and I received the display cable from Aliexpress. I replaced the damn thing (Not fun, but doable) and to my surprise it worked! The laptop and the display turns on and boots into Windows. If anyone else has this problem, do try and replace the cable before replacing the motherboard\giving up, for me at least it saved the entire laptop.
2 of 3
1
If the beeping started after you took it apart then it means you fucked up somewhere. Hopefully it’s just a cable issue and not a damage / ESD issue. Take it back apart, repaste, and carefully reconnect every cable, every drive, and every memory module.
Dell
dell.com › dell community › laptops › locked topics – alienware general
Alienware Beep Codes Table | DELL Technologies
June 5, 2012 - Alienware Desktops and Laptops Support Forum · Posts · Selected Posts · Unsolved · This post is more than 5 years old · DELL-Chris M · +24 more · Community Manager · • · 56.9K Posts · • · 232.1K Points · 0 · 1626045 · June 5th, 2012 08:00 · Laptops 1 Possible Motherboard (covers BIOS corruption or ROM error) 2 No RAM detected 3 Possible Motherboard Chipset 4 RAM failure (other) 5 CMOS Battery 6 Video card/chip 7 CPU 8 LCD Desktops 1 Possible Motherboard (covers BIOS corruption or ROM error) 2 No RAM detected 3 Possible Motherboard Chipset 4 RAM failure (other) 5 Real Time Clock (RTC) 6 Video card/chip 7 CPU ·
Dell
dell.com › support › kbdoc › en-us › 000179529 › alienware-computer-does-not-turn-on-or-go-into-windows
Troubleshoot Alienware Not Turning on or Booting into Windows | Dell US
If you get a 2 or 4 beep code, test one memory module at a time.
Tom's Hardware Forum
forums.tomshardware.com › home › systems
Alienware x51 shutting down, continous 2 beeps. | Tom's Hardware Forum
December 19, 2015 - Well like you said. Acording to the motherboard, 2 beeps mean a memory issue.
Dell
dell.com › dell community › laptops › alienware
M17x R4, beeping at Power-up | DELL Technologies
March 13, 2023 - According to the Alienware Beep Codes Table posted many years ago (since yours is a very old laptop), here is what they mean depending upon the number of beeps: 1 Possible Motherboard (covers BIOS corruption or ROM error) 2 No RAM detected 3 ...
Top answer 1 of 4
1
Sorry, forgot to add. Once you have completed the power drain, re-assemble the laptop and plug in the charger. If it starts charging wait for 15 minuted before booting up, you will get 5 beep, force shutdown and restart, it should fix itself after that. If it doesn't start charging then try to start it, go through the on/off procedure and then let it charge before using
2 of 4
1
I've seen this before. You should be able to fix it with a complete power drain. You will have to remove the main power, battery and coin cell battery then hold the power button down for at least 30 seconds. It's quite a job getting to the coin cell battery in the M14x, here a link to the service manual to help you. http://downloads.dell.com/manuals/all-products/esuprt_laptop/esuprt_alienware_laptops/alienware-m14x-r2_owner%27s%20manual_en-us.pdf Page 69 I think your looking for. Make sure to follow the instructions carefully and electronically ground yourself so your don't damage any internal components.
Top answer 1 of 8
1
here are the beep codes. the number stands for number of beeps. the beeps may possibly loop after a few seconds. do only count one beep cycle. 1 Possible Motherboard (covers BIOS corruption or ROM error) 2 No RAM detected 3 Possible Motherboard Chipset 4 RAM failure (other) 5 CMOS Battery 6 Video card/chip 7 CPU 8 LCD
2 of 8
0
thanks for your replay the model is :m14x the issue began , in some day I plug HDMI cable at the boot time . after while the beep come and some times is working fine but now it doesn't work at all.
Quora
quora.com › My-Dell-PC-is-not-working-no-display-making-2-beep-sounds-than-nothing-Why
My Dell PC is not working, no display, making 2 beep sounds than nothing. Why? - Quora
Answer: Looks like it has a issue with the ram. Beep Code 1: Motherboard, covers BIOS corruption or ROM error. Beep Code 2: No Memory (RAM) detected. Beep Code 3: Chipset Error (North and South bridge error), Time-Of-Day Clock test failure, Gate A20 failure, Super I/O chip failure, Keyboard contr...