The Apple cables appear to be designed to safely melt without starting a fire in cases where the internal insulation breaks down in case of crushing, slicing, piercing (kittens are even worse than cats in this regard) or simply worn out due to repetitive bending in the same spot.
I've seen people decide to use cords when lightly damaged - sealing the cable with electrical tape. Since the voltage is low on the MagSafe side of the cord, this is more a heat/fire risk than a shock risk. The MagSafe board on the Mac usually protects your hardware from any sort of short - and it also is replaceable if it's fusing blows.
I have on rare occasion seen some nice third party adapters that work with MagSafe connections - but none yet on MagSafe 2. I have seen far, far more dangerous adapters than safe ones.
The worst part of counterfeit adapters is that they typically carry the same "safety" markings as a quality electronics adapter. Also, some have high quality plastics and similar weight so you may have to be very observant to tell a good knockoff from a genuine part. Unless you are using the adapter in an environment where a small fire could reasonably be contained without undue risk to finances or life, you might avoid using a third party adapter if you are not skilled at evaluating electronics for build quality.
- http://www.righto.com/2015/11/macbook-charger-teardown-surprising.html?m=1
The article above explains how the Apple charger is engineered with a processor in the MagSafe connector and a main processor that's equivalent to the original Macintosh - you're getting a computer inside every Apple charger as well as dense and highly safe design shown on the left and a knockoff design on the right.
I've been well served by buying Apple adapters in terms of reliability and safety, despite the higher cost. I know many that have had good luck with quality third party adapters, but wanted to explain the why some third party adapters are dangerous to use and not even close to equivalent to Apple's product.
Answer from bmike on Stack ExchangeThe Apple cables appear to be designed to safely melt without starting a fire in cases where the internal insulation breaks down in case of crushing, slicing, piercing (kittens are even worse than cats in this regard) or simply worn out due to repetitive bending in the same spot.
I've seen people decide to use cords when lightly damaged - sealing the cable with electrical tape. Since the voltage is low on the MagSafe side of the cord, this is more a heat/fire risk than a shock risk. The MagSafe board on the Mac usually protects your hardware from any sort of short - and it also is replaceable if it's fusing blows.
I have on rare occasion seen some nice third party adapters that work with MagSafe connections - but none yet on MagSafe 2. I have seen far, far more dangerous adapters than safe ones.
The worst part of counterfeit adapters is that they typically carry the same "safety" markings as a quality electronics adapter. Also, some have high quality plastics and similar weight so you may have to be very observant to tell a good knockoff from a genuine part. Unless you are using the adapter in an environment where a small fire could reasonably be contained without undue risk to finances or life, you might avoid using a third party adapter if you are not skilled at evaluating electronics for build quality.
- http://www.righto.com/2015/11/macbook-charger-teardown-surprising.html?m=1
The article above explains how the Apple charger is engineered with a processor in the MagSafe connector and a main processor that's equivalent to the original Macintosh - you're getting a computer inside every Apple charger as well as dense and highly safe design shown on the left and a knockoff design on the right.
I've been well served by buying Apple adapters in terms of reliability and safety, despite the higher cost. I know many that have had good luck with quality third party adapters, but wanted to explain the why some third party adapters are dangerous to use and not even close to equivalent to Apple's product.
My 2¢: Purchase OEM.
Apple's chargers (along with everything else, it may seem) are remarkably expensive, but of anything, from what I have seen, there is a reason for it. When it comes to the life-blood of the computer, charging it with something that could potentially harm the entire system is quite a risk. It would be sad to save ~$40 only to have $1000+ worth of equipment fail for some reason.
Unrelated iPhone charger review (but maybe related):
www.phonearena.com
iFixit message post:
www.ifixit.com/what-kind-of-charger
Neither of those links are very impressive, but you may find what at least some people think about Apple's chargers interesting.
For the new charger (either OEM or third party), I wouldn't worry too much about the higher wattage, unless the price is almost exactly the same, or the higher wattage unit is more available. If you purchase a Macbook Pro, it will come with a power cable as well.
I bought a macbook air about 18 months ago, and the cable has frayed/bent near the magsafe connector. I've checked the reviews on apple's site - and this seems pretty common. I've not mis-treated the adaptor (IMHO) and this looks like a design flaw.
http://www.apple.com/au/shop/reviews/MD592X/A/apple-45w-magsafe-2-power-adapter-for-macbook-air
Has anyone seen any alternatives to the genuine magsafe 2 adapters that are more robust? I don't really want to spend $100 on something that appears to be designed to look good, not last a long time.
Quit bending it so hard at the end of the cable.
That said, if it's under Apple care, apple will replace it.
Apple doesn't license the MagSafe design to any 3rd parties so anything you'd buy that isn't apple branded would be made by an illicit source that you should not be trusting with your expensive computer.
If you got Applecare (WHY NOT????) go to an Apple Store and they'll give you a new one.
Videos
I have an older MacBook 2015 ish? It has one of those 12 ft chargers. It has a 3 ft lead that plugs into the wall then plugs into the brick then the MagSafe comes out the other side. Can I just get a charger that plugs into the wall with a usbc to MagSafe 2 plug? The charger now is a 45w MagSafe 2. I was reading some Amazon reviews of products and hear arcs and sparks and had to pump the brakes on that idea. Any help would be greatly appreciated.
As far as I know I can use the 85w charger on MacBooks that only require 45w, correct? Since they’re all $79 why would anyone get the 45w one when they can get the 85w one for the same price? The only difference I’m aware of is the weight.
For context I have a 2017 MacBook Air
Been looking for an Apple 45W Magsafe 2 charger everywhere, was hoping to buy an authentic one pero it looks like lahat sold out na online (from stores like The Loop, etc). Resorted to looking for secondhand through Carousell pero original ones are hard to find.
Do you know any alternatives? Are the OEC ones priced at around 1,300-1,900 recommended? Takot kasi ako gumamit ng fake charger, my Macbook Air's battery life is already at its last leg, I don't want to make it worse
hi, i'm bringing this old topic back to life for a hyperspecific issue i can't just solve by getting a magsafe charger (which, i already have, i just want a proper use for my ugreen...)
i got an early 2015 macbook pro for christmas, and also a ugreen uno 100w which - i imagine is faster than the 60w charger that came with the macbook?? though the fast charging bit of it is only usb-c, and for me to use this on the macbook which was the original purpose... is to get a usb-c to magsafe 2 cable!!! except where the heck do you find ones that don't look super shady!!!
i specifically want a dark/black one though i will settle for one that is non matching to the silly bmo looking ugreen. if anyone reading knows where to find these pleaseee tell me, ive only found a couple amazon candidates and im not sure how compatibile they would be with the ugreen in the first place- wattage just confuses me in general. i will update if i find thank u for considering :>