Rockler
rockler.com › power tools › power wood carving › power carvers › power carver accessories › arbortech ball gouge
Arbortech Ball Gouge | Rockler Woodworking and Hardware
Arbortech Ball Gouge
The Arbortech Ball Gouge is a spherical angle grinder attachment that rapidly hollows small concave surfaces in wood. At approximately 1-3/16'' in diameter, the ball-shaped cutter is ideal for carving wooden spoons, small bowls and small to medium sculpting. It provides exceptional control, balance and performance in freehand wood shaping and carving, thanks in part to Anti-Grab Technology, which helps reduce the chance of dig-ins. When moved across a wooden surface, the Ball Gouge can also be used to create a rustic chisel-like texture. Its revolutionary, ring shaped blade is self-sharpening,
Price US$129.00
Harbor Freight
harborfreight.com › search
Harbor Freight | Whatever You Do, Do It For Less
Harbor Freight buys their top quality tools from the same factories that supply our competitors. We cut out the middleman and pass the savings to you!
YouTube
youtube.com › watch
Power Carving Tips & Techniques - Arbortech Ball Gouge - YouTube
In this video, learn tips and techniques from the CEO and co-founder of Arbortech, Kevin Inkster.The Ball Gouge is a unique grinder attachment that can rapid...
Published November 2, 2022
YouTube
youtube.com › mike peace woodturning
Harbor Freight for Woodturners? - YouTube
I have bought a fair amount of stuff from Harbor Freight for my woodturning. Some a good value and some not so much. As an Amazon Associate I earn from quali...
Published July 7, 2017 Views 131K
Amazon
amazon.com › ARBORTECH-Spherical-Carving-Attachment-BAL-FG-2000 › dp › B0752TXPKD
ARBORTECH Ball Gouge | Ø 30 mm Spherical Shaped Wood Gouge Power Carving Attachment for Angle Grinder | BAL.FG.2000: Amazon.com: Tools & Home Improvement
Arbortech Precision Carving System - 3 Piece Precision Power Carving Attachment Set for Woodworkers Featuring Mini Ball Gouge - PCS.FG.1000.20
Penturners
penturners.org › forums › penturning › penturning
1/2" roughing gouge?? | The International Association of Penturners
March 7, 2008 - I prefer to use my 1'' spindle gouge instead of my 1/2'' to rough blanks... I bought cheap tools from Harbor Freight and all the gouges seem the same: cut from a round stock (I though all gouges were). Believe it or not, they have been working fine for me (granted they probably suck compared to expensive high quality chisels).
Amazon
amazon.com › Arbortech-Ball-Gouge-Grinder-Attachment › dp › B0752TXPKD
Amazon.com: Arbortech
arbortech ball gouge · arbortec · arbortech pants · Previous · 1 · 2 · 3 · 4 · Next · Visit the help section or contact us · Go back to filtering menu · Skip to main search results · Popular Shopping Ideas · Tools · Power Carving · Accessories ·
Arbortech Tools
arbortechtools.com › us › shop-online › power-carving › attachments-accessories › ball-gouge
ARBORTECH Ball Gouge Grinder Attachment | Arbortech Tools AU | Arbortech
Shop the Ball Gouge Grinder Attachment along with more truly unique quality Power Carving Tools & Accessories for Angle Grinder at arbortechtools.com
Reddit
reddit.com › r/turning › harbor freight chisels
r/turning on Reddit: Harbor Freight Chisels
February 2, 2025 -
Wanting to give my first bowl/cup a try. The lathe I got only game with a roughing gouge, skewer chisel, and a scraper. Curious if anyone has gotten this set at HF and if it’s good enough for a beginner like me before invest bigger money.
https://www.harborfreight.com/wood-lathe-chisel-set-8-piece-70461.html
Top answer 1 of 4
6
I have a set of these. I’ve turned a few things with them with no issue…I would say proper sharpening will allow you to get the most out of this tool set.
2 of 4
6
$30 more but likely significantly better and more useful than the set you linked. https://www.harborfreight.com/hand-tools/chisels-punches-stamps/chisels/high-performance-lathe-chisel-set-6-piece-59644.html
Harbor Freight
harborfreight.com › home › hand tools › knives & axes › woodworking knives & carving sets
Wood Turning Sets - Harbor Freight Tools
Find Your Local Harbor Freight Store · 1 Item · All Woodworking Knives & Carving Sets · 1 Item · $79.99 · Add to Cart Add to List ·
YouTube
youtube.com › playlist
Tool Resources - Ball Gouge - YouTube
Share your videos with friends, family, and the world
KMS Tools & Equipment
kmstools.com › arbortech-ball-gouge.html
Arbortech Ball Gouge
Arbortech Ball Gouge
Designed to fit standard 4" (100 mm) and 4-1/2" (115 mm) angle grinders, the Ball Gouge can handle speeds up to 12,000 RPM.
Price $149.00
Lee Valley Tools
leevalley.com › lee valley home › tools › power tool accessories › discs › mini-turbo, turboshaft & ball gouge wood-shaping tools
Mini-Turbo, TurboShaft & Ball Gouge Wood-Shaping Tools - Lee Valley Tools
Mini-Turbo, TurboShaft & Ball Gouge Wood-Shaping Tools
Price $135.45
Sawmill Creek
sawmillcreek.org › forums › woodworking by hand and specialties › turner's forum
Harbor Freight HSS chisels | Sawmill Creek Woodworking Community
October 19, 2009 - I would go to Penn State and get this set. http://www.pennstateind.com/store/LXWM1007.html?mybuyscid=6425366343 Every tool is a basic useful tool, including the bowl gouge. Harbor Freight is missing some pretty basic tools, like a bowl gouge, and needlessly repeats others.
TreelineUSA
treelineusa.com › home › roughing tools › arbortech ball gouge
Roughing Tools - Arbortech Ball Gouge - TreelineUSA
The Arbortech Ball Gouge is a spherically shaped grinder attachment that can rapidly hollow small concave surfaces in woodworking projects. It offers exceptional control, balance and performance in freehand wood shaping and carving. This 30mm diameter ball-shaped cutter is ideal for crafting ...
Reddit
reddit.com › r/turning › buying a harbor freight lathe
r/turning on Reddit: Buying a Harbor Freight Lathe
February 21, 2023 -
Hello, I’ve been interested in wood turning, but don’t want to spend much money on a lathe. I’ve heard that the Harbor Freight benchtop lathe is good as long as you get one that doesn’t have many defects.
What are some defects that I should immediately return the lathe for?
Top answer 1 of 5
12
It is a generic Chinese export design. You can get basically the exact same lathe from any number of other importers, the main difference being the paint color. If that. Defects may be hiding beneath that paint job because these are fairly cheap castings. They don't want to throw out many castings for quality control reasons, so they will just spackle and fill any holes, as long as they don't interfere with the machined surfaces. You would only discover that after you strip the paint, which most people of course never do. It's mostly just cosmetics anyway. Also the Chinese often times have a real hard time to line up the bearing seats properly, but all that does is give a little more runout , which for beginning woodturning purposes does not have to be the end of the world. But the geometry should not be too wonky. At the very least, if you put centers into head and tailstock, their tips need to line up. And the axes should be parallel to the bed ways. Sadly you can only really determine that with several hundred bucks' worth of measuring equipment. But if you put a large forstner bit into a drill chuck in the tail stock and drill into a piece of wood chucked on the spindle (or screwed to the faceplate if you don't have a chuck yet), and you get really bad chatter, there is probably a misalignment. If the headstock spindle points sideways, it is probably easy to correct but if it points up or down, it will be a bigger challenge. In any event though, I would still not buy the HF lathe because I think they only sell the five-speed version. (They don't let me access the web site currently beause of my adblocker and/or cookie suppressor.) Basically the exact same machine is also available with three-speed pulleys plus variable motor speed, from other vendors, and although the motor speed control is achieved with fairly cheap electronics, I would take that over fixed speeds any day. Especially since the lowest speed of the fixed-speeds version is already 650 rpm, which is uncomfortably fast for trueing up larger unbalanced blanks. However, the five-inch three-speed/variable speed version also starts at about 650 rpm. So what you should do is spend a little more and get at least the Grizzly T25920. Or whatever the vendor of your choice chooses to call his version of that exact same machine. It has six inches of center height, so you can mount blanks up to about twelve inches, and EDIT: in the latest version, speeds start out at only 300 rpm, which may still not be quite ideal for large unbalanced blanks but it is a damn sight better than twice-as-fast. And it's only $125 more, which is a complete no-brainer. (Earlier versions of this machine, and possibly other vendors' versions that remain on sale, start out at 650 rpm.) Also, if you don't want to spend several years learning how to be an Indian woodturning yogi , you need to spend another couple hundred bucks on tools and accessories . For starters. You can make do without a Jacobs chuck, although it is nice to have, and you can make your own basic screw chuck , and every lathe usually comes with a spur drive, faceplate and live center. But beside the basic chisels, scrapers and gouges, you want at least a basic "dead" center and a basic four-jaw chuck with dovetail jaws for the headstock spindle. (If you want to save money in the long run, splurge on a set of "Piranha" or "shark tooth" jaws like in the video.) Some drills. Lots and lots of sand paper. Dust extraction. Some tools to measure wall thickness. Definitely some sort of grinder to sharpen your HSS tools and help cobble together your own tools, jigs and solutions. A router if you haven't got one already, plus an extra long 8mm HSS bit, as the most cost-effective way to make the largest bowl blanks that will fit on your machine. It all adds up.
2 of 5
8
I started with that lathe. It was a fine starter benchtop unit, basically identical to all the others in its class. I upgraded to the bigger freestanding Harbor Freight lathe, and I wish I'd started with that one. It's not much more expensive and way more useful, if you have the space. It'll be a bit before I outgrow this one, main knock is the slowest speed is still kinda fast.
Reddit
reddit.com › r/woodcarving › arbortech ball gouge on end grain ash
r/Woodcarving on Reddit: Arbortech Ball Gouge on end grain ash
December 13, 2022 -
Just wondering if anyone with an Arbortech Ball Gouge knows how well it'll work for scooping out Ash end grain?
LumberJocks
lumberjocks.com › home › forums › woodworking › woodcarving
Help choosing 4" angle grinder tool for power carving | LumberJocks Woodworking Forum
I like the chain saw type as I can sharpen the blades and I know it can give be an acceptable finish to sand down further. It appears it would be a touch limited in getting into smaller recesses. And the Harbor Freight one is the same make as Woodcraft but $15 cheaper.
Reddit
reddit.com › r/woodworking › harbor freight got me again
r/woodworking on Reddit: Harbor Freight got me again
June 21, 2024 -
I've done some turning on a friend's lathe and really enjoyed it. I didn't plan on getting one for myself, but stumbled across this on clearance for $90. Damn you Harbour Freight! Anyway, now it's mine. What upgrades/accessories would you get for this machine? Anyone have experience with this tool?
Top answer 1 of 5
106
I’ll let more experienced people answer, but you’re gonna have a lot of fun with that, I think. I also think that was just the first $90.00 you spent on turning wood, but far from the last.
2 of 5
67
There’s a pro woodworker in my area that does a lot of custom cabinets and furniture and frequently teaches a variety of classes in his shop. The dude is legit. He just posted that exact model for sale because it was finally time for him to upgrade to something larger, but he said that was the only one he’s ever owned, and it got him through any turning pieces he needed for work as well as all of his classes on woodturning for like ten years.
Highland Woodworking
highlandwoodworking.com › woodcarving › arbortech-ball-gouge-tool-review.html
Arbortech Ball Gouge | Jeffrey Fleisher
arbortech ball gouge woodworking tool review - tool reviews of woodworking tools available at Highland Woodworking