Are the drawer fronts compatible with all types of drawer boxes?
You can install our drawer fronts to any drawer box with a front substrate to screw through. You can also fasten to drawer systems from various hardware manufacturers such as Blum.
Do you offer matching cabinet doors and drawer fronts?
All of our pre-configured drawer fronts will have a matching door. Simply match up the name of the front to the door name. You will also see that some flat panel fronts will have a matching raised panel front.
How do I measure my existing drawer fronts to order the correct replacement size?
When replacing existing drawer fronts with the same overlay (amount the drawer front lays past the opening) simply enter the exact measurements of existing doors and drawer fronts.
When changing overlay or measuring for new openings:
Measure the opening and add 2x the desired overlay. For example, a 20″ W x 4″ H opening with a 1/2″ overlay would need a 21″ x 5″ drawer front (2 x .5 + 20= 21″).
Videos
Replace kitchen drawer front
Go to below. Pick a similar style drawer front and color then put in custom measurement you need. They'll ping you a quote and order. Then take the metal handle off the old drawer and put on the new one. Drill holes and fit.
https://kitchenandbedroomdoors.co.uk/kitchen_door_designs.asp?gad_source=1&gclid=Cj0KCQiA7OqrBhD9ARIsAK3UXh0Dh8lo4vDLBPkDAnYZmdMkimSVIrrvX9bIOrJICFj2IvNgCERCURoaAo-oEALw_wcB
More on reddit.comAdvice needed, please: drawer face replacement
Does Ikea offer replacements for just a Malm drawer front?
Repairing Finish on Older (pre-2015) IKEA "Rationell" drawer fronts
I am having trouble sourcing a replacement drawer front for my kitchen unit.
I know nothing about DIY but I'm in a rented flat and need to sort this out myself rather than talk to the landlord about it as this is entirely my drunken self's fault.
I have purchased the drawer cavity from Ebay with the correct size but I can't find anywhere that just does drawer fronts.
Am I right in thinking this is something I'm have to have cut to the correct size (500mm x 150mm x 15mm) and then drill holes myself to be able to fit the front to the cavity?
From the lack of search results for "kitchen drawer front 500mm only" I'm guessing that's the case.