Good plywood on top from Boulter Plywood north of Boston (a 3 hour round trip for me). Horrible plywood from Lowe’s (a 15 min round trip for me). Both are 3/4” “Maple” plywood, but I swear the Lowe’s wood has a finish on it. It is shiny and very smooth. The inner ply’s are garbage. I normally don’t mind exposed plywood edges on my personal projects but I can’t do that with the Lowe’s wood.

I usually buy sheets of 1/2” 4x8 whitewood plywood that I cut into 20” squares for signs.

It’s been $55 forever but just jumped up to $75 in a little over a week. That’s like a 35% jump.

Any idea what happened? That’s crazy

Hey guys, I did search in this sub for 1" (once inch) plywood thickness but it did not return the result I am looking for. can you advise where I can get a 1"x4FTx8FT plywood? I am about to build a closet door which will have a handle like this picture, and a 1-inch thickness is needed to put this handle.

I have a project with requires about 70 pieces of 1/8" thick wood, 5.5"x7.25", plus a few other pieces. Basically, I need a 4x8 sheet's worth of 1/8" wood.

Home depot sells 4x8 sheets of 1/8" thick hardboard which would work but wouldn't be as nice. I could redesign the whole project to use 1/4" material but that would be a pain and it would end up larger than I'd like.

So, is it possible to find sheets of 1/8" wood? If so, where should I be looking? Or should I just use hardboard? Is MDF an option?

Cost is a factor. Also, I don't really know what I'm doing so feel free to make other suggestions.

Thanks!