I was playing games and decided to update my laptop since windows was bugging me about a firmware upgrade.
Afterward, the screen no longer turned on, the keyboard and fans were running, and the power button was blinking red twice and blue three times. According to Dell, that’s the diagnostic code for failure to detect RAM or memory.
I’ve never touched the RAM or memory in the laptop. Ideas??
Remove the battery & RAM Sticks and its unplugged from the wall charger > Press and hold the power button for about 15 seconds > Plug everything back in and ensure its all well seated > Boot as normal.
If this post is looking for tech support, please see the stickied tech support post at the top of the sub, Official Dell support is now helping users in that post should you require it.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
So ,My Alienware 15 R3 was getting BSODs like a month ago and I fixed it by reseating my only 8GB RAM stick and cleaning it from dust ,But recently it started happening again and alot with different error codes mostly been Memory_Management and when i tried to restart ,it flashes a ( 2 Blue 3 Red ) Code which means that there is no RAM detected in the system when it was running fine 10 min ago before the crash . I ran the memory diagnostic tool and nothing came out faulty, I also ran sfc /scannow in CMD, and all my drivers are updated including windows 10
-
So do i clean the RAM stick again and inserted this time in a different slot ? I need help asap ,please.
I have an Alienware M15R6 and one of the slots is not working. It has 2 slots and each of them has 8GB. When the faulty slot is fitted with the 8GB Ram the laptop doesn't boot up and the alienware logo lights up as 2 reds and 4 blues. When removed the laptop boots up normally although with only 8 GB Ram. Both of the Ram sticks are working as i tested both of them in each slot and concluded that when the Ram is in slot 2 the laptop is not booting up. What should i do? Do i have to change the motherboard or is it repairable?
I just recently got an Aurora R10 and set it up yesterday. Today I started it up and it ran fine for about half an hour then it shut off. Now it will not turn back on and is showing 2 blinks of a yellow light, then a pause, then another 2 blinks. I looked it up online and it says that light code means there is no ram detected. I have opened it up and checked out the memory cards and they are installed correctly so I’m not sure what the issue is. Anyone have an idea?
[Resolved] I purchased a RAM upgrade for my aurora r11. I installed it alongside the original stick of ram yesterday. The original in the 2nd port where I found it and the upgrades in the 1st and 3rd slots. And it worked perfectly.
This evening when I got home from work I got an amber light code thrown indicating ram failure. (2 blinks)
After spending the last 3 hours troubleshooting I have discovered that I can get the system to run fine using just the old ram. And it doesn’t throw any codes when I have just the new ones plugged in but it doesn’t send any signal through the hdmi port.
My fear is that my new ram isn’t compatible with my mobo but that doesn’t explain why it DID work yesterday.
The new ram is Mushkin Enhanced Redline Stiletto 64GB (2 x 32GB) DDR4 3200 (PC4 25600) Desktop Memory Model MRF4U320EJJP32GX2
I’ve attempted to find compatibility lists myself but my searches have been wholly fruitless
Any help identifying the problem would be wildly appreciated. More so if that help doesn’t involve attempting to return these new memory sticks