Videos
Asus dropped new bios to
1.AGESA updated to ComboAM5 PI 1.3.0.0a.
2.Provide additional stability margin during high-frequency DDR5 training.
3.Addresses potential boot failures and stability issues observed on certain Ryzen 9000 configurations.
4.Resolves an issue where systems might unexpectedly prompt for a BitLocker recovery key during startup
Feedback will be board model and bios version and if stable or not the latest bios
such in cold boot or reboot and rgb and memory and cpu so on .thank you
how to update :
-
Suspend BitLocker in windows 11 or 10.
-
Download correct BIOS (and rename it).
-
Put BIOS file on USB or just flash bios directly from your drive no need for usb if you dont have one.
-
Enter BIOS → load defaults →press F7 to switch to Advanced Mode → Tool tab → ASUS EZ Flash 3 Utility
-
Flash BIOS (do NOT interrupt)
-
Wait patiently after reboot Press F1 to put back your settings (bug sometimes in rtx 50 cards nothing shows up after bios update just press F1 after you flashed bios if its stuck in black screen for a while)
-
Enter BIOS → load defaults → adjust settings →disable ERASE FTPM NV FOR FACTORY RESET (if tpm reset you would get bitlocker and you cant log in with pin password to windows)
-
Boot into Windows → Resume BitLocker OR KEEP IT OFF BETTER FOR PIECE OF MIND .
Bugs :Remove armory crate cause system stability in certain 800 motherboard as proart boards.
Asus dropped new bios to
1.Update AGESA ComboAM5 PI 1.3.0.1.
2.Improve compatibility and performance for Ryzen 9 9950X3D2 Dual Edition processors.
3.Add new Crosshair Tweak items for advanced performance tuning (available on select models).
Feedback will be board model and bios version and if stable or not the latest bios
such in cold boot or reboot and rgb and memory and cpu so on .thank you
how to update :
-
Suspend BitLocker in windows 11 or 10.
-
Download correct BIOS (and rename it).
-
Put BIOS file on USB or just flash bios directly from your drive no need for usb if you dont have one.
-
Enter BIOS → load defaults →press F7 to switch to Advanced Mode → Tool tab → ASUS EZ Flash 3 Utility
-
Flash BIOS (do NOT interrupt)
-
Wait patiently after reboot Press F1 to put back your settings (bug sometimes in rtx 50 cards nothing shows up after bios update just press F1 after you flashed bios if its stuck in black screen for a while)
-
Enter BIOS → load defaults → adjust settings →disable ERASE FTPM NV FOR FACTORY RESET (if tpm reset you would get bitlocker and you cant log in with pin password to windows)
-
Boot into Windows → Resume BitLocker OR KEEP IT OFF BETTER FOR PIECE OF MIND .
Bugs :Remove armory crate cause system stability in certain 800 motherboard as proart boards.
The bios version I have is BIOS version: 310 VBIOS version: 1052.I021FX503VD.002 EC version: R1.13 As you can see my laptop is ASUS FX503VD. I was wondering if there is a newer version that I didn’t get or update I didn’t do.