So I have built a new PC with this motherboard and the first time I turn it on my fans went on very loud I have installed Armoury Crate and then change it to standard mode which seems to solve the problem for the time I am being on my PC, but the real problem is now that I have to switch to standard fan speed mode every time I start up my PC, I have tried and change fan speeds in BIOS but it didn't change anything for me. Anyone had this problem and would like to help me out ?
Videos
The PCH_FAN header looks like a 4 pin header so should be controlled via PWM. Anybody able to confirm? Thanks!
Hello! I came across a issue of controling my FANS
I can set the W PUMP+ FAN header to connect a fan thats a nice feature! So i have 3 BeQuiet Pure Wings 2 conected to dc, so far so good. Last one is on the Punp header and for some reason i cannot go under 60% of the fan speed. My Other 2 Fans connected to Fan 2 and m2 running on DC at minimum 35% thats quite enough! For some reason the unlocked PUMP header not going under 60
Anyone have a solution?
Thanks for helping
We're sorry to hear that you're having this issue and we'll be happy to assist. Could you send us a private message with your email so that we can provide you with a feedback form, please?
Hey man, i have the same board and i just recently solved this issues a few days ago. However, i have to note i'm using a Phanteks fan hub so i'm not sure how that would factor in.
My issue resided in the Asus AI suite software. When i would run the "Autotune fans" feature, it would totally disable the controller and make my fans spin at 100 percent all the time. I had to reinstall the fans and just control them in the software manually.
Are you using any software? Are the fans only DC powered? Have you tried switching to PWM for the Pump header? Not to say that you should have to spend money to fix the issue but I highly recommend a PWM/DC fan hub for this MOBO. DeepCool has one on Amazon for $14. As an alternative via Amazon, you can get some fan splitters for $6. It is a nice solution if you'd like to power all your fans from 1/2 heads instead.
Asus ROG Strix X570-I Gaming, AMD X570 mini-ITX Gaming motherboard:
My M.2 is mounted on the rear, since my heatsink was impossible to remove without stripping the screws. The PCH Fan that cools the empty front-side M.2 slot randomly decided to crap out last night waking me up around 3AM. It was stuck running around 5K RPM and there was no way to easily disable the fan.
Here's how I solved the issue:
-
Power cycle- No improvement -
Dust Everything- No improvement -
Remove Heatsinks- No improvement -
Install Bios Update- No improvement -
LibreHardwareMonitor- No Fan Control options for the PCH fan -
Open Hardware Monitor- No Fan Control options for the PCH fan -
Bios Hex Editing- Not worth bricking the board or risking warranty -
Disconnect PCH Fan connector - Silence at last!
-
Shut down the system
-
Remove the GPU
-
Locate the PCH Fan Connector between the M.2 Heatsink and bottom left mounting hole
-
Disconnect the connector from the motherboard
-
Just bought a 5950x + ROG Strix X570-F Gaming and I tried using Armoury Crate - but I just cant find a way to control the fans.... I want to build special fan curves because the sounds drives me crazy !
please help