July 12, 2023 - To adjust the bass and treble settings, you will need to use the knobs on the front panel of the speaker. The knobs are usually labeled with numbers or symbols that indicate the amount of bass or treble that is being applied to the signal. ... The bass and treble settings on a Marshall speaker can have a big impact on the overall sound.

September 30, 2008 - Actually Fender is quite a bit more mid scooped than the Marshall at full everything. Leaving the mid full up and backing off B and T will help even a little bit more but there’s no such thing as flat. ... Iron Maiden-style classic metal. On my DSL15, Bass 2 Middle 7 Treble 2 Presence 5 Gain 3 Deep off Tone shift off On my DSL20, same settings but with Gain on 4, Resonance on 0, and a TS9 as a clean boost.

Use the bass knob to adjust the low-frequency audio output. The default position is five (right in the middle), also known as flat or unaffected EQ. Use the treble knob to adjust the speaker for clarity and shrill high frequencies.

September 16, 2023 - For general listening, it is widely agreed upon that a relatively neutral setting for your EQ is best. That means keeping the bass, mids, and treble around the middle of their respective Hz range.

Control the sound by turning the ... greatly affects the playtime of the battery. Set it to five (right in the middle) for an optimal volume-to-playtime ratio....

Use the bass knob to adjust the low-frequency audio output. The default position is five (right in the middle), also known as flat or unaffected EQ. Use the treble knob to adjust the speaker for clarity and shrill high frequencies.

May 17, 2022 - Click to expand... 2203x - Presence - 0 to 5 (depends on the room and volume) Bass - 5 Middle - 3 Treble - 3 Master - 2 or 3 Preamp - 5 or 6 (with Hot Mod V2) or 7 (without Hot Mod V2)

October 25, 2008 - Are there any suggestions for adjustments for each speaker zone, or to just leave them as they are? ... Most people are running their systems flat. +0 at both bass & treble.

December 12, 2022 - If you want a “boomy” kind of sound, then you’ll need a high bass setting. If it sounds a bit too heavy and muddy, then you’ll need to lower it. The “middle” or “mids” control adjust the mid-range frequencies. Most of the time, the mids should be mid-high to make the tone sound full. Consider turning the mids up to provide depth to the tone. Guitars are usually responsible for providing this kind of frequency in a band setting, whilst singers provide a lot of the treble and bass guitars of course provide the low-end to produce a balanced sound.

Adjust the volume, bass, and treble ... The volume greatly affects the playtime of the battery. Set it to five (right in the middle) for an optimal volume-to-playtime ratio....

Adjust the low-frequency audio output by turning the bass knob on top of the speaker or using the Marshall Voice app. The default position is five (right in the middle), also known as flat or unaffected EQ. Turn the treble knob on top of the speaker or use the Marshall Voice app to adjust the sound for clarity and shrill high frequencies.

Use the bass knob to adjust the low-frequency audio output. The default position is five (right in the middle), also known as flat or unaffected EQ. Use the treble knob to adjust the speaker for clarity and shrill high frequencies.

July 1, 2019 - The way that a Marshall amp is designed, the tone stack is flattest when Bass is at about .5, Mids are at 10, and Treble is at 0. Don’t believe me?

August 8, 2024 - I personally start at 6 6 6 for Bass / Mid / Treble and adjust from there.

Answer (1 of 3): It may depends on what instrument or stereo amp. The basic way is to understand how both bass and treble knob works on what ever instrument or stereo you are using . Keep both of the know zero and gain or lower one of the knob and see how it works. If you gain to much , the s...

We cannot provide a description for this page right now