Aidot
aidot.com › blog › post › how-to-install-led-strip-lights-in-car
How to Install LED Strip Lights in Car?
May 11, 2024 - To begin with, make sure that you determine the exact location where you want to install the lights in your car and measure the area so that you can purchase the correct size of LED strips. When deciding where to install LED strip lights in your car, it's important to consider the location of the power source and how easy it would be to access it.
Instructables
instructables.com › workshop › cars
How to Install Car LED Strip Lights : 5 Steps - Instructables
October 13, 2017 - Tap the Red wire to battery positive/Black wire to negative or ground. If there is an optional wire, check the installation sheet to see what it's for. These diagrams demonstrate where the LED strips are located in the car, in relation to their ...
How do I install LED strip lights?
Get a LED light strip of the right length, clean the mounting surface with rubbing alcohol to remove dirt, grease or grime that may affect adhesion. If sticking them onto walls, stick the strip on aluminium mounting bars. But when installing in your car, stick the LED strips directly onto the surface.. This is a complicated task, so we suggest you hire Taskers to do the LED light strip installation for you, as well as dash cams and speakers.
airtasker.com
airtasker.com › home › services › auto electricians › led lights installation
Find 50 LED Lights Installation Experts near you | Airtasker US
How can I install LED light strips on ceilings?
This involves mounting them on thin aluminium bars and sticking them onto your wall. The LED light junction box and power source are installed in your attic, then drill holes in the wall and run the wiring through to power the lights. Mount the central control panel on your wall. The final step in the installation is nailing crown mouldings under the light strips. We recommend hiring expert Taskers to install LED light strips on ceilings for you.
airtasker.com
airtasker.com › home › services › auto electricians › led lights installation
Find 50 LED Lights Installation Experts near you | Airtasker US
How long does it take to do the LED lights installation?
The length of time it takes to do this service depends on the complexity of the work, the number of LED light strips to install and the speed of your hired Tasker. This entails small but complicated tasks like wire-stripping, soldering and connecting the lights to a power source, and mounting them to a surface with adhesives. You can expect a skilled auto electrician to complete the job within a minimum of 2 hours.
airtasker.com
airtasker.com › home › services › auto electricians › led lights installation
Find 50 LED Lights Installation Experts near you | Airtasker US
Videos
13:09
How to install Car Interior RGB LED Strip Lights - YouTube
01:17
Kit of 4 RGB LED Strip Lights for Car Interior Lighting
09:00
How to Add Ambient Lighting to ANY Car! (EASY DIY) - YouTube
19:21
Here's How To Install THE BEST Interior Lighting Kit We Could Find!
13:18
DreamColor Ambient Lighting Kit Review | Installation, Pros and ...
05:05
This Is the BEST Interior Ambient Lighting Kit for your Car! (Not ...
Accord X Club
accordxclub.com › home › forums › 2018+ honda accord tech and performance section › electronics, audio, and lighting
How to add LED strips to any light in the car with or without manual override | 2018 Honda Accord Forum
July 8, 2021 - I found some flexible little led modules in 10k color temp, and wired them directly to the trunk and door lights for the footwell/trunk lights. Works perfectly now no relays, mess of wires, and one less add a fuse.
Any idea how I can put my LED strip lights underneath my seats? It doesn’t look like I have anywhere to attach the sticky side to...any suggestions?
Depends on your resources and how good of a job you want to do. For a nice looking job, buy some L-shaped metal bar from Home Depot and cut it to the right width to reach the seat mounting bolts on both sides. Drill holes into the bar so the original bolt can go through it. Cut a notch out of the vertical piece of the bar so the seat rail can lay flat on it. The LED light strip can be stuck to the vertical face of the bar. If you want to go quick and dirty, grab an old ruler, exacto knife, and some zip ties. Cut some small notches into the fabric under the seat to route zip ties through that will hold the ruler in place. Stick the light strip to the ruler. More on reddit.com
4
0
May 27, 2021LED light strip on dashboard installation?
Hey, I recently saw a post where someone put led strips along his dashboard. The tool comes with a prying kit to pop open the crack to insert the film. I cant seem to pry open certain places, they seem completely stuck together? Some places like under the screen, it snucks right in except for... More on mavericktruckclub.com
1
Installation LED strip
I did this with my old civic. It was dumb and distracting. It seems cool for 5 minutes, then it gets old really fast, and honestly feels cheap. Keep the nice ride. More on reddit.com
6
1
January 13, 2025Connecting led strip to car's dome light - Core Electronics Forum
Hello. I want to install two led strips in my car for a footwell ligth. Do you think they can be connected to the dome light connector? One possible issue is that led has two wires but the connector - three. Of course i will measure the voltage but want to know if it’s technically possible. More on forum.core-electronics.com.au
0
November 25, 2024Airtasker
airtasker.com › home › services › auto electricians › led lights installation
Find 50 LED Lights Installation Experts near you | Airtasker US
The LED lights installation service can include cutting LED light strips to the correct size, mounting strips, bars, or headlamps to your car, and connecting the lights with their control panel or switch to a power source.
Address Ontario, United States
Inspired LED
inspiredled.com › technical-guides-and-tutorials › diy-project-tutorial-led-car-lighting
LED Strips For Car - How To Install LED Strip Lights In Car
August 11, 2022 - Step 3: Add tiger paw screw terminal connectors to the end of each LED strip by peeling back flex strip adhesive, pulling open black tiger paw tab and inserting flex strip. Push black tab closed to ensure secure connection. (Learn more about using Tiger Paw® Screw Terminals by clicking here.) Step 4: Wire each string of lights together by first loosening the screws on each Tiger Paw® screw terminal. Strip back cable about ¼”, and taking care to match polarities to LED strip, retighten screws to make connection.
Reddit
reddit.com › r/cars › any idea how i can put my led strip lights underneath my seats? it doesn’t look like i have anywhere to attach the sticky side to...any suggestions?
r/cars on Reddit: Any idea how I can put my LED strip lights underneath my seats? It doesn’t look like I have anywhere to attach the sticky side to...any suggestions?
May 27, 2021 -
https://www.reddit.com/r/carmodification/comments/nmhzu8/any_idea_how_i_can_put_my_led_strip_lights/?utm_source=share&utm_medium=ios_app&utm_name=iossmf
I tried to cross post this here but realized pictures aren’t allowed lol...someone suggested zip ties...but where would I even tie them to? The only thing I can think of is to poke holes in the fabric for them but idk if I should do that.
Top answer 1 of 4
4
Depends on your resources and how good of a job you want to do. For a nice looking job, buy some L-shaped metal bar from Home Depot and cut it to the right width to reach the seat mounting bolts on both sides. Drill holes into the bar so the original bolt can go through it. Cut a notch out of the vertical piece of the bar so the seat rail can lay flat on it. The LED light strip can be stuck to the vertical face of the bar. If you want to go quick and dirty, grab an old ruler, exacto knife, and some zip ties. Cut some small notches into the fabric under the seat to route zip ties through that will hold the ruler in place. Stick the light strip to the ruler.
2 of 4
1
Zip ties hot glue uhhh stapler
Tint World
tintworld.com › home › automotive services › automotive services › auto accessories › automotive lighting › interior car lights
Interior LED Light Installation Services for Cars | Tint World
September 20, 2024 - Find custom options for interior car lights with Tint World’s LED installation package. Upgrade your car’s interior lighting with LED lights installed by experts using the best equipment. Tint World® has all you need for advanced interior car lights, including Smart LED kits, exterior lights, militia-color light strips and much more.
Govee
us.govee.com › blogs › product-review-blog › how-to-install-led-strip-lights-in-car-interior
How to Install LED Strip Lights in Car Interior? – Govee | Govee US
September 7, 2021 - LED lights are famous for their low energy expenditure, so these 12V LED strip lights for cars won't impact your car's power consumption.
Quora
quora.com › How-do-I-install-LED-lights-in-your-vehicles-interior
How to install LED lights in your vehicle's interior - Quora
Answer (1 of 2): Generally auto LED bulbs are available to suit the fixture like smaller cap, wedge bulb etc and advised to choose the appropriate bulb as per wattage recommended.
LED Lights Unlimited
ledlightsunlimited.net › home › how to wire strip lights in your vehicle
How To Wire Strip Lights In Your Vehicle / LED Lights Unlimited
July 21, 2024 - Most installations will connect to the vehicle’s fuse box, battery, or an auxiliary power source. Cut the LED strip lights to the desired length. Most LED strips can be cut at designated points, usually marked by a line or a small scissors icon.
MaverickTruckClub
mavericktruckclub.com › forums › tech › lighting
LED light strip on dashboard installation? | MaverickTruckClub - 2022+ Ford Maverick Pickup Forum, News, Owners, Discussions
April 10, 2023 - Hey, I recently saw a post where someone put led strips along his dashboard. The tool comes with a prying kit to pop open the crack to insert the film. I cant seem to pry open certain places, they seem completely stuck together? Some places like under the screen, it snucks right in except for...
Sound Certified
soundcertified.com › home › led strip lights
How To Install LED Light Strips In A Car - Sound Certified
July 10, 2023 - Wondering how to install LED light strips in a car? You're in luck! Here's a great DIY guide with tips, diagrams, and much more to show you how.
YEELIGHT
store.yeelight.com › blogs › light-tips › how-to-install-led-strip-lights-in-car
Ultimate Guide to Installing LED Strip Lights in Your Car Interior – YEELIGHT
LED Strip Lights Kit: Most importantly, the LED strip lights kit is the key highlight of your project. Make sure such a kit is specially made for cars and contains all necessary parts, such as connectors and controllers. Car Manual: Always have the manual of your car within reach. It contains all the information about your car's electrical system, along with potential spaces that you may wish to use in the course of doing the installations.
Birddog Lighting
birddogdistributing.com › blog › guide-installing-led-strips-underneath-car
How-to Guide For Installing LED Strips Underneath Your Car - Birddog Lighting
May 28, 2017 - If you have a truck, you can attach the LED lights to the edges of the bed. You’re also going to want to choose a spot for the module box. The module box is where the wired from the LED strips connect to. Note that you’ll want a spot AWAY from the engine and radiator. This would cause considerable heat damage. That would mean more time and money for you. Clean the underneath of your car. This especially applies to where you’re going to install the strips.
Reddit
reddit.com › r/cx5 › installation led strip
r/CX5 on Reddit: Installation LED strip
January 13, 2025 -
Anyone had any luck installing this? Looking for some feedback on this. I got the adhesive ones that go under the floor seats but the adhesive from the stickers wore out quickly from the AZ hear.
Ledialighting
ledialighting.com › home › how to install led strip lights for cars
How to Install LED Strip Lights for Cars - Ledia Lighting
March 21, 2025 - Install the strips in well-ventilated areas, away from heat sources and flammable materials. Regularly check the wiring and connections for damage, and turn off the lights when not in use to prevent overheating.
iJDMTOY
store.ijdmtoy.com › under car led underbody light kit installation guide
Under Car LED Underbody Light Kit Installation Guide — iJDMTOY.com
Step 1: Set the LED strip underneath your vehicle. Now is a good time to see if the underside of your car has any way of securely attaching the LED strips, including bolts, brackets or other small openings.
Muzataled
muzataled.com › blogs › application-scenarios › step-by-step-guide-to-installing-car-interior-lights
A Step-by-Step Guide to Installing Car Interior Lights – Muzata LED Channel and Strips
January 22, 2025 - Test the LED Strips: Before sticking anything in place, plug in your LED strips to ensure they're functioning correctly. This step allows you to identify any faulty lights before installation. Peel and Stick: Once you've confirmed that the LED strips are working, carefully peel off the adhesive backing and apply the strips to your chosen locations.
Core Electronics
forum.core-electronics.com.au › t › connecting-led-strip-to-cars-dome-light › 21655
Connecting led strip to car's dome light - Core Electronics Forum
November 25, 2024 - Hello. I want to install two led strips in my car for a footwell ligth. Do you think they can be connected to the dome light connector? One possible issue is that led has two wires but the connector - three. Of course i …
AutoZone
autozone.com › exterior accessories › exterior lighting › lighting - directional and multi purpose exterior lighting
LED Light Strip - Find the Right Part at the Right Price | AutoZone
AutoZone provides their customers ... the best LED light strips for cars and trucks to be found in the industry today. Whether you want to light up the interior area under your dash, set your gauge cluster ablaze during the nighttime, or amplify the look of your vehicle after dark by installing them underneath ...