January 20, 2023 - File NameUSB_serial_driver_QuantumII.zip · Preparing download, please wait.. To ensure the integrity of your file, kindly verify the checksum value · SHA11b1fa041eff7b6fab10e9fe73d3149c4db750886 · SHA25610c399ac784d2b68b1bb2ba598bab7fe00cfdfd267b4cc14a3e3240fe9499fb1 ·

September 13, 2023 - File NameUSB_serial_driver.zip · Preparing download, please wait.. To ensure the integrity of your file, kindly verify the checksum value · SHA190d809e20475432802f89bc4139056b743240195 · SHA25636c4235dc4c7442f262c4ac0a8344cddf2011a03f9f6be391cda8aa670892b2e ·

Applies to: Spark Firewall

January 29, 2019 - InstructionsInstall this driver on the endpoint (laptop/desktop) from which you would like to connect to the appliance miniUSB console port. Upon driver installation, a new COM port will be available on the endpoint. Use the new COM port to connect to connect your serial console client (such as ...

March 4, 2022 - Per default, no USB A port can be used as a console port on CP appliances. This questioning is getting a bit tiresome 😕 Looks like you just did not read sk177138... - all you need is found here including cable type and firmware: sk177138: Console connectivity to SMB 1500 appliance via USB Type A

January 2, 2022 - Applies to: Spark Firewall

File NameUSB_Serial_Driver_Quantum_3900.zip · Preparing download, please wait.. To ensure the integrity of your file, kindly verify the checksum value · SHA1728cb4b240bb277ff36eee134932510718976cec · SHA25680f1795e957f029a2d01d197c7801e91acb2fa3630404c832ee580ff1c8ff4a0 ·

January 3, 2022 - Your request is empty, fill at least one ID type · Wrong syntax for SecureKnowledge IDs, use this format: skdddd

You can configure advanced options ... or the CLI. To connect to the command line interface of the 16000 Appliances, use one of these: An SSH connection to the management interface (if SSHD is configured). A serial console cable and terminal emulation software, such as PuTTY (from Windows) or Minicom (from Unix/Linux). 16000 Appliances support these serial console connectivity options: USB type-C - Using ...

August 21, 2016 - InstructionsInstall this driver on the endpoint (laptop/desktop) from which you would like to connect to the appliance miniUSB console port. Upon driver installation, a new COM port will be available on the endpoint. Use the new COM port to connect to connect your serial console client (such as ...

RJ45 - Using the included RJ-45 to DB9 serial console cable. Connection parameters are: 9600bps, 8 bits, no parity, 1 stop bit (8N1), Flow Control - None. If you use both the mini USB/USB Type-C (depending on the appliance) and RJ45 console ports, the mini USB port/USB Type-C has priority.

USB Type-C - Using the included USB Typc-C console cable in 3600/3800.

April 21, 2022 - A: The appliance itself, a power supply, two network cables, a USB-C serial console cable and the usual Getting Started Guide. Q: What CPU is working inside ? A: ARM AArch64 Processor [410fd081] Q: What operating system is it running on ? A: The 1500 Appliance runs on: Check Point GAiA Embedded R80.20 Q: What are the features of Check Point GAiA Embedded OS ?

Applies to: Check Point Appliances

Optional: Connect the console cable to the console port on the back of the appliance, and to a USB port on a supported terminal. The baud rate should be set to 115200. Set the Flow control to None. To get the console driver, click: https://www.silabs.com/products/development-tools/software...

- but what about the USB type-C to USB-2.0 type-A cable for 15xx, 1600 and 1800 ? @Mikael added the link to the needed drivers, and here is the procedure: Note - To use the miniUSB/USB Type-C console port, a driver must be installed on the console client machine (desktop/laptop). For installation instructions and download link, see the appliance home page. Configuring checkpointing ...