Hydro rebuild - Only Cub Cadets
Cub cadet RZT 50 hydrostatic transmission - TractorByNet
Hydro-gear transmission for mower. | Yesterday's Tractors Forums
Cub cadet RZT 50 zero turn
Videos
I’ve got one of my transmissions that will stop working after about 15 minutes of driving it, when it cools off it’ll drive again until it hot. Any suggestions on where to start ? Maybe a seal kit ?
Attached a picture to the post. Got this from a friend who was moving. It definitely works as he was using it yesterday morning. 427 hours.
Model is 17AH3AGP709
The deck needs one of the casters welded back on. We had to take the deck off to get it on the trailer. So seems like a good time to sharpen the blades, weld the caster on, check bearings and replace the belt.
I know the hydrostatic transmissions can be a problem. The owners manual says the transmission isn't serviceable. However, it does appear to have a filter on each transmission and the expansion tank. I should be able to pull the filters to drain, replace them and refill via expansion tank with the vents pulled.
Anyone know what I should use for the hydraulic filters?
It does start hard cold and needs to run with choke for a while. The carb is a chinese amazon one and the original is long gone. I might see if the choke lever is bent, probably do a valve adjustment (unless it has hydraulic lash adjusters) and some plugs to try to get it to start better.