July 30, 2020 - Therefore I had to cut the copper thin string of the DP cable (the colour of the cable on PIN 20 is white btw). That automatically stop the Orange blinking and now is solid white!

Using a blink and color shift pattern to indicate where it has a problem. NOTE: If you have an OptiPlex All In One (AIO) Computer, use the reference tables below. NOTE: To see the contents of a section, click the heading to expand that section, or show all to expand all the sections. ... NOTE: On any OptiPlex built since 2012 (that is, 7010/9010/9010 AIO), Dell has stopped using all beep codes except for the Memory Failure code.

May 15, 2025 - If you're lucky, it might post or return an error code other than cursed 2-1. And if you're feeling adventurous, try a BIOS recovery procedure. ... i just unplug and press power button for 30 sec, and then plug back in while pressing the button, it works perfectly fine for me, but i cant be ...

July 21, 2025 - Dell laptops use diagnostic LED blink codes to convey hardware issues during startup. A blinking pattern of 2 orange (amber) lights and 1 white light is specifically Dell’s code for a CPU failure.

September 15, 2025 - Asurion Experts explain the meaning behind the orange flashing light on Dell laptops and how to stop it.

May 28, 2025 - Whenever I get a flashing light code on a Dell desktop, the first thing I do is remove the RAM, blow out any dust, and reseat. Starting with one stick (as mentioned in another reply) is also a good way to go if the reseat doesn't fix it.

The power status light blinks amber along with beep codes indicating failures. For example, the power status light blinks amber two times followed by a pause, and then blinks white three times followed by a pause. This 2,3 pattern continues until the computer is turned off indicating the Recovery image is not found.

March 8, 2022 - 2,1 blink code = Processor failure · Don't panic, yet... Have you recently installed anything new inside the PC? When was last time you replaced the motherboard battery? If it's old, I'd start there, if nothing else than to rule the battery ...

July 27, 2024 - Hi All, Needes help I have a Dell Optiplex 9020, which is giving 2,1 Amber light on Power button and does not start easily. Once It starts then you run it for hours it works fine with no issues, the blinks keep happening. Looked.up the error code online and also tried to find few fix and workaround like resetting CMOS battery , or reset Bios or service code, tried.umplugging all power cables.etc from motherboard but they just.help.to start the system next day problem is back again.

For example 2,3 = 2 amber blinks, short pause, 3 amber blinks followed by long pause then repeats. ... All fields are required unless marked otherwise. ... Sorry, our feedback system is currently down. Please try again later. Thank you for your feedback. Please provide ratings (1-5 stars).

April 14, 2025 - The blinking orange and white light on Dell laptops typically indicates an issue related to the battery or power adapter. This article summarizes common causes, diagnostic steps, and solutions base...

Example 2,3 = 2 amber blinks, short pause, 3 amber blinks followed by long pause then repeats. WARNING:The power LED only serve as an indicator of the progress through the POST process. These LEDs do not indicate the problem that caused the POST routine to stop ... Please provide ratings (1-5 stars).

March 11, 2025 - The error code 2 amber, 1 white indicates CPU failure.

July 14, 2023 - - Try calibrating the battery as mentioned in the previous response. Fully charge the battery, then discharge it completely, and charge it again to 100%. - Check the battery health in the Dell Power Manager or BIOS.

For example 2,3 = 2 amber blinks, short pause, 3 amber blinks followed by long pause then repeats. ... All fields are required unless marked otherwise. ... Sorry, our feedback system is currently down. Please try again later. Thank you for your feedback. Please provide ratings (1-5 stars).

According to Dell diagnostic indicators, lights 1 & 3 suggest a RAM issue. A blinking orange power light indicates a failing or failed PSU. Please try re-seating the RAM chips one at a time, starting with no RAM, and see if the error persists.