We are a repair shop having the same problem today during a a screen replacement job for a Inspiron 15' 7559. Device came in not powering on, I thought it was battery flat so I just proceeded without testing to put the new screen on. After putting the new one on it I found it was still not powering on, it stuck at a black screen and LED blinking 2 amber then 7 white as described in the heading. Therefore I put back the old screen but it was the same black screen. After some play around and switching the old & new screens, pull and putting the connector back and secure it with tape etc etc. In one of the million times I made it to boot into Windows normally, everything went fine so I put everything back with the screen on and shut down the machine. I tried to run a last test before calling the customer in, found it came back stuck at black screen again. I touched nothing at all and the machine shut down like normal, no flickering no nothing. I followed instruction found on some other threads here to long press D then power on, it ran on a self test. So I did with the old screen on, nothing happens. Then with new screen on, I could see the screen have slight color changes this time but without any back light at all. Putting the old screen back on again, this time backlight lit up but screen was badly cracked so I couldn't see anything, and after just a hard power off, it came back to the black screen again. SOOOOOOO frustrated! After looking up the fault code, the LED blink shall point to LCD problem. However the tests result switching between the old & new screens was kinda on & off, there was no solid conclusion of whats wrong also I couldn't make another successful boot into Windows. In one of the long press D self tests the new screen has lit up and it could run thru the entire self test with different solid color screens but it just wont boot into Windows, and I could not make another self test run with backlight on. I started playing around with the LCD cable, cleaned the socket and connector with alcohol and tried again, same black screen. Then I have gently twisted the cable and putting the old screen on. It booted again! So this time I have hooked up an external monitor and did the BIOS update immediately. After the BIOS update I put on the new screen very carefully and now it boots every time now. Customer has picked up the machine and both of us are happy now ;) Conclusion: I really dont know if it was the cable or BIOS update did the magic for me but I will suggest to first update the BIOS first if you are experiencing this during a LCD repair. If nothing has been replaced and it happen suddenly. The LCD cable will lead to this therefore try pulling the bezel around the LCD, unscrew the 4 screws and take the LCD out. Carefully lift the tape and use the little 'handle' to gently slide the connector out of the socket in opposite direction of the tape, then putting it back carefully. Do not touch the connector, do not bent or pull the cable by force, it is not that fragile but it only take 1 hit to kill it if you do it improperly. Good luck! Answer from phonefixhk on dell.com
Dell
dell.com › support › kbdoc › en-us › 000135030 › a-reference-guide-to-the-precision-mobile-diagnostic-indicators
A Reference Guide to the Precision Mobile Diagnostic Indicators | Dell US
The blinking patterns consist of two sets of numbers that represent: (First Group: Amber blinks, Second Group: White blinks).
Dell
dell.com › support › kbdoc › en-us › 000153002 › a-reference-guide-to-the-precision-workstation-diagnostic-indicators
A Reference Guide to the Precision Workstation Diagnostic Indicators | Dell US
Note: Diagnostic LEDs can be either Green or Amber depending on the model type, but are always either off, flashing, or solid on. This series had a combination of Power button LED states with the diagnostic LEDs 1, 2, 3, 4. The diagnostics LEDs are on the front of the chassis. Note: There are two types of color for the Power LED: Green or Blue depending on the desktop model. Dell Precision desktops have a long history of integrated diagnostic indicators.
Inspiron 7559, LCD failure, 2 amber, 7 white blinking LED
So as the title says, the Inspiron 7559 I am working on for my roommate is giving me the 2/7 pattern. It's a nice machine for his purposes. We got it working a few months ago with a CMOS drain, but... More on dell.com
16
1
May 8, 2019Precision 5530 front LED blinks 2 yellow 7 white
My new Dell Precision 5530 laptop's front LED blinks 2 Yellow and 7 white. What does it indicate and what can be the reason? ... Check out Diagnostic LEDs for the Precision series (2016 to Present). It stands for CPU failure. Contact Dell directly for warranty support. ... I have 2 amber, 7 white ... More on dell.com
5
0
March 6, 2019Is 2 amber 7 white a frequently occurring error?
https://www.dell.com/support/manuals/en-ca/g-series-15-5515-laptop/dell-g15-5515-service-manual/system-diagnostic-lights?guid=guid-812a5e3e-a7b5-4c9e-8850-f71aefd4484e&lang=en-us 2 amber 7 white indicates a display failure, not a motherboard failure, which would makes sense based on your description. More on reddit.com
3
0
November 19, 2025Latitude 5401 blinking 2 amber, 8 white
LCD Failure Troubleshooting: 2 Amber, 7 White Blinking LED ... Thanks for the info. The screen seems to be working fine, is there something else that might make the computer think the LCD is failing? ETA: those codes are from the second link - those are error codes for tablets. ... I have latitude 7400 . Faced same problem so dell changed motherboard but after 2 weeks same problem came. ... I have the same problem as you, but my device is precision ... More on dell.com
12
0
March 6, 2020Videos
Dell
dell.com › dell community › desktops › precision fixed workstations
Precision 7810 2 amber blinks fallow by 7 amber blinks | DELL Technologies
August 2, 2022 - Hello, My precision 7810 during start up 2 blinks followed by a short pause, 7 blinks, long pause and repeats. According to Dell web site this is: memory modules were detected but a memory failure ...
Top answer 1 of 15
2
We are a repair shop having the same problem today during a a screen replacement job for a Inspiron 15' 7559. Device came in not powering on, I thought it was battery flat so I just proceeded without testing to put the new screen on. After putting the new one on it I found it was still not powering on, it stuck at a black screen and LED blinking 2 amber then 7 white as described in the heading. Therefore I put back the old screen but it was the same black screen. After some play around and switching the old & new screens, pull and putting the connector back and secure it with tape etc etc. In one of the million times I made it to boot into Windows normally, everything went fine so I put everything back with the screen on and shut down the machine. I tried to run a last test before calling the customer in, found it came back stuck at black screen again. I touched nothing at all and the machine shut down like normal, no flickering no nothing. I followed instruction found on some other threads here to long press D then power on, it ran on a self test. So I did with the old screen on, nothing happens. Then with new screen on, I could see the screen have slight color changes this time but without any back light at all. Putting the old screen back on again, this time backlight lit up but screen was badly cracked so I couldn't see anything, and after just a hard power off, it came back to the black screen again. SOOOOOOO frustrated! After looking up the fault code, the LED blink shall point to LCD problem. However the tests result switching between the old & new screens was kinda on & off, there was no solid conclusion of whats wrong also I couldn't make another successful boot into Windows. In one of the long press D self tests the new screen has lit up and it could run thru the entire self test with different solid color screens but it just wont boot into Windows, and I could not make another self test run with backlight on. I started playing around with the LCD cable, cleaned the socket and connector with alcohol and tried again, same black screen. Then I have gently twisted the cable and putting the old screen on. It booted again! So this time I have hooked up an external monitor and did the BIOS update immediately. After the BIOS update I put on the new screen very carefully and now it boots every time now. Customer has picked up the machine and both of us are happy now ;) Conclusion: I really dont know if it was the cable or BIOS update did the magic for me but I will suggest to first update the BIOS first if you are experiencing this during a LCD repair. If nothing has been replaced and it happen suddenly. The LCD cable will lead to this therefore try pulling the bezel around the LCD, unscrew the 4 screws and take the LCD out. Carefully lift the tape and use the little 'handle' to gently slide the connector out of the socket in opposite direction of the tape, then putting it back carefully. Do not touch the connector, do not bent or pull the cable by force, it is not that fragile but it only take 1 hit to kill it if you do it improperly. Good luck!
2 of 15
1
If your Dell laptop shows 2 amber flashes followed by 7 white flashes, this diagnostic code indicates an LCD failure. This can occur on multiple Dell models, not just one specific system. What Does This Error Mean? The LCD panel may be defective. The LCD cable could be loose or damaged. In rare cases, the issue could be with the motherboard’s display circuit. Troubleshooting Steps Perform a Hard Reset Unplug the power adapter and remove the battery (if removable). Disconnect all external devices. Hold the power button for 15–20 seconds to drain residual power. Reconnect the battery and AC adapter, then try powering on. Run the LCD Built-In Self-Test (BIST) With the system off, hold down the D key and press the power button. The screen should cycle through colors (white, red, green, blue, black). If the test fails or doesn’t run, the LCD panel may be defective. Test with an External Monitor Connect an external display via HDMI or DisplayPort. Press F8 (or the appropriate key) to switch displays. If the external monitor works fine, the issue is likely with the LCD or its cable. Reseat the LCD Cable If you’re comfortable opening the system: Power off and unplug the device. Remove the base cover and locate the LCD cable. Disconnect and reconnect it securely. Refer to your system’s service manual for detailed steps. Update Video Drivers If the LCD works intermittently, update your graphics drivers from Dell Support. Next Steps – If none of the above steps worked: If under warranty: Click the Get Help Now button at the bottom-right corner of this page to chat with Dell Tech Support. If out of warranty:The LCD panel or cable may need replacement. If the issue persists even after reseating, the motherboard could be the cause. You can contact Dell Tech Support for a service quotation or reach out to a trusted technician for a hands-on diagnosis.
Dell
dell.com › dell community › laptops › precision mobile workstations
Precision 5530 front LED blinks 2 yellow 7 white | DELL Technologies
March 6, 2019 - What does it indicate and what can be the reason? ... Check out Diagnostic LEDs for the Precision series (2016 to Present). It stands for CPU failure. Contact Dell directly for warranty support.
Reddit
reddit.com › r/dell › is 2 amber 7 white a frequently occurring error?
r/Dell on Reddit: Is 2 amber 7 white a frequently occurring error?
November 19, 2025 -
I bought my g15 3 years ago and its screen broken about 1 month ago, the manifests as flickering patterns on the screen. I asked help with the official service centers and cost about 230$ for a new one. I thought that was all cz I always take good care of my computer. when I end a large game I always shutdown after it cool down, but yesterday I found that booting time is longer than before, and the screen turned off by itself. I have to press the power button twice then it lights up. But today noon my PC completely stop working. When I tried to boot there's no logo on screen. no logo, no bios, nothyat all. but the keyboard light and the fans working, and I can heard the sound of chime. The I found the LED lights shows 7 whites 2 amber. i went the service center again and they told me that not the problem of the screen but the motherboard. They can try to repair it, otherwise the only way is install a new motherboard. Oh Jesus it may cost me 200$ or even more again. I googled and finds plenty of same faults like 7 white 2 amber. This clearly isn't an isolated case anymore. Is this some kind of design flaw?
LaptopJudge
laptopjudge.com › 2-amber-7-white-dell
2 Amber 7 White Dell (5 Steps To Fix) - LaptopJudge
March 23, 2023 - several factors can contribute to your dell laptop’s lcd failure; if you close down the lid with force, there might be chances that the internal connections that keep your lcd alive might have broken, or the wire that connects the dell laptop lcd to the mainboard is damaged, and so on. the simplest solution to solve the 2 amber 7 white led light blinks is to contact dell support and look for the issue.
Dell
dell.com › dell community › laptops › latitude
Latitude 5401 blinking 2 amber, 8 white | DELL Technologies
March 6, 2020 - LCD Failure Troubleshooting: 2 Amber, 7 White Blinking LED ... Thanks for the info. The screen seems to be working fine, is there something else that might make the computer think the LCD is failing? ETA: those codes are from the second link - those are error codes for tablets. ... I have latitude 7400 . Faced same problem so dell changed motherboard but after 2 weeks same problem came. ... I have the same problem as you, but my device is precision 7540.
Dell
dell.com › support › kbdoc › en-us › 000211732 › no-post-2-4-2-amber-and-4-blinking-white-when-memory-is-populated-in-the-wrong-dimm-slot
Precision 5860 Tower or Precision 7960 Tower No POST Error of 2 Amber 4 Blinking White | Dell US
You may experience no POST with LEDs showing 2-4 (2 amber and 4 blinking white) if the single DIMM of memory is installed in the wrong DIMM slots. This occurs when memory is not inserted into the memory slots starting with DIMM 1. ... This is expected behavior if the memory is not installed ...
Dell
dell.com › dell community › laptops › laptops wiki
Fix Dell Laptop LED Blink Code 2 Amber, 4 White (Memory Error) | DELL Technologies
March 31, 2026 - Blink pattern: 2 amber → pause → 4 white → repeats (front battery/power LED).
Dell
dell.com › dell community › laptops › laptops wiki
How to fix a device showing 2 amber and 4 white lights? | DELL Technologies
January 18, 2024 - The 2 amber + 4 white LED blink code on Dell Inspiron systems typically signals a memory (RAM) failure or related hardware issue detected during startup. If your product is in warranty, you can eas...
Top answer 1 of 5
1
If your Dell laptop is showing 3 white flashes followed by 2 amber flashes, here’s what that means and what you can do: What Does This Error Mean For Older Systems? This LED pattern indicates a PCI or video card (GPU) failure. On most Inspiron laptops, the GPU is integrated into the motherboard, so this is usually a hardware issue.Before jumping to major repairs, try these steps: Power Drain Reset Disconnect the AC adapter and remove the battery (if possible). Hold the power button for 30 seconds to discharge residual power. Reconnect and try powering on. Check RAM Reseat the memory modules or try booting with one module at a time. Faulty RAM can sometimes trigger similar codes. Run Dell Diagnostics If you can get any display, press F12 at startup and select Diagnostics. If there’s no display, diagnostics won’t run, which further points to a GPU/system board issue. Next Steps – If none of the above steps worked: If your product is under warranty: You can easily reach out to Dell Tech Support right here. Just click the Get Help Now button at the bottom-right corner of the page to start a real-time chat with an expert. If out of warranty: You’ll likely need a motherboard replacement (GPU is soldered and not user-replaceable). Note: Newer Dell systems (2019 and newer) with a flash code of 2 amber, 3 white will likely have a memory failure. Please refer to your service manual on the support site to confirm the exact failure. If you suspect a memory failure, then please refer to this video to see if the symptoms align.
2 of 5
1
3,2 is a GPU failure - the only solution for that is a replacement main system board.
Dell
dell.com › dell community › laptops › xps
XPS 13 2 amber blinks, 7 white | DELL Technologies
December 29, 2018 - Please check out the community wiki below, which contains a summary of the solutions shared in various threads regarding this issue. Let us know if this helps resolve your problem! LCD Failure Troubleshooting: 2 Amber, 7 White Blinking LED
Iss
iss-kb.iss.k12.nc.us › books › windows-devices › page › dell-diagnostic-led-blink-codes
Dell Diagnostic LED Bl... | ISS Tech Knowledge Base
The diagnostic pattern will consist of a two-digit number being represented by a first group of LED blinks (1 through 9) in amber, followed by a 1.5 second pause with the LED off, and then a second group of LED blinks (1 through 9) in white. This is then followed by a three second pause, with ...
Reddit
reddit.com › r/dell › 2 amber & 4 white
r/Dell on Reddit: 2 amber & 4 white
March 21, 2024 -
Hey, fellow tech enthusiasts I am facing a black screen with no post and a combination of 4 white and 2 amber LED codes when opening my laptop. Laptop model is G15 Ryzen addition
Looking forward to your insights and suggestions. Thanks in advance for your tech wisdom!
Top answer 1 of 5
2
Memory or Read-Only Memory (ROM) failure If competent, take the memory out and try the following - if there are two DIMMS then try each one in each slot to see if there is any change, if just one DIMM the try both slots and also try no RAM installed and it should produce a 2,3 code. Manual at https://dl.dell.com/content/manual36483742-dell-g15-5515-service-manual.pdf?language=en-us and memory at P. 24 Remember to insert and remove at 45 degree angle. Good luck Got warranty?
2 of 5
2
RAM issue, visually inspect it to see if any chip looks damaged on the sticks If no visible damages, install one at the time and see if anything changes If nothing happens after the test you might need new ram, if even with new ram fails, it’s a Motherboard issue
Dell
dell.com › dell community › desktops › optiplex desktops
Memory error, 2 then 7 amber blinks | DELL Technologies
August 22, 2023 - The power button blinks amber twice, then a pause, followed by blinking amber 7 times.
Dell
dell.com › support › manuals › en-us › precision-3650-workstation › prec_3650t_sm › system-diagnostic-lights
Precision 3650 Tower Service Manual | Dell US
Power button LED blinks 2-times in Amber followed by a pause, and then blinks 3-times in White.
Dell
dell.com › dell community › desktops › optiplex desktops
Optiplex 3060 power led flashing twice amber then seven times amber | DELL Technologies
July 13, 2023 - We have a not very old Optiplex 3060 with a power led flashing twice amber then seven times amber. ... Dell has stopped using all beep codes except for the Memory Failure code. (1, 3, 2, or 1 beep, then 3 beeps, then 2 beeps.) If your system was built after 2012 and is making any other beep code, please contact technical support for further help.
Top answer 1 of 2
2
Yes data is stored on your hard drive - nothing to do with RAM · Unfortunately on this model the RAM is soldered in? · Important! Backup your files before sending the laptop to Dell. This page shows how to remove drive. · Dell XPS 13 9300 SSD Replacement · You will need another computer with either a compatible slot or an external USB case and backup software. There are several freeware backup apps on the Web.
2 of 2
0
(Solution for models with removable RAM sticks) · The issue you're experiencing is due to the CPU overheating, which causes the solder connections on the "SLOT A" memory RAM to become soft and detach from the motherboard. · When you disassemble your laptop, you may notice melted rosin or flux residue. · Unfortunately, there isn't a permanent fix for this. · One temporary solution is to apply pressure to the top of the RAM holders to try and secure a good connection, which might prevent the laptop from displaying the "2 amber + 4 white" error code. · However, the best option is to use "SLOT B" and upgrade the memory stick in that slot. I hope this helps! · Gosh
Dell
dell.com › home › support home › product support › manuals
Dell Precision Tower 3420 Owner's Manual | Dell US
Amber LED blinking scheme – The pattern is 2 or 3 blinks followed by a short pause then x number of blinks up to 7. The repeated pattern has a long pause inserted in the middle.