The reset procedure for the fully Jarvis L-Shaped Standing Desk is as follows:Press and hold the DOWN button until the desk reaches its lowest position. Release.Press and hold the DOWN button until the display reads "RST". Release.Press and hold the DOWN button again, this time until the desk first lowers slightly, then rises slightly, and finally stops. Release the DOWN button. For more information, see page 28 of the manual.

The fully Jarvis L-Shaped Standing Desk frame includes various components. The frame parts consist of Frame Ends, Bracket Frame End, Corner Frame End-A, Corner Frame End-B, Center Rail Support, Center Rails, Corner Leg, Side Leg, Foot, Corner Bracket, Left Side Bracket, Right Side Bracket, Mending Plate, Crossbar, and Noise Attenuation Pads. The electric parts include a Control Box, Memory Handset, Power Cable, and Leg Cables. Hardware provided are Long Machine Screws, Medium Machine Screws, Short Machine Screws, Thick Machine Screws, Wood Screws, Cable Clips, and Extra Acoustic Dampening Grom

To assemble the fully Jarvis L-Shaped Standing Desk, you will need a 4mm Hex Wrench and a 5mm Hex Wrench, both of which are included. A Phillips Head Screwdriver is also required but is not included. For more information, see page 4 of the manual.