To be clear, all printers suck because you failed to properly maintain one? More on reddit.com

Having all the same issues rn dont know if you ever found a solution More on reddit.com

Are you using/plugged into the WAN port of your google mesh? So from your tmobile router-------(WAN port)Google mesh What wireless network is your wireless printer using? (google mesh or tmobile) What wireless network is your client using? (google mesh or tmobile) If both client and printer are on the google mesh device, then this is a google mesh issue not a tmobile router issue If you are using the WAN port on the google mesh/have routing/the firewall enabled then yes you having a double NAT issue. For a lot of people this isnt generally a big deal for basic internet web surfing streaming. It can cause some headaches for gamers and or if you have something plugged into the tmobile router (wireless/wired) and another client plugged into your google mesh. (say you want the client on the tmobile to access something on the google mesh) Best practice is use bridge mode for any kind of wireless router because it just simplifies your network https://support.google.com/googlenest/answer/6240987?hl=en&co=GENIE.Platform%3DAndroid More on reddit.com

I encountered this same problem today... it started out printing intermittent lines, then degraded to the point where it stopped printing black completely. Color printing seemed subdued. I tried the same as you... selected head cleaning routine, then pulled cartridge out and cleaned the print head with water. No real change, but I kept re-cleaning the head (and also selected "yes" when it asked me if I wanted to try a 'deep clean' after each regular cleaning). Eventually, it seems to have cleared the print head and now it's printing black very well again. So keep trying to clean the heads. You might want to check out some Youtube videos on how to manually clean printer heads, too. I was about to do that, but the auto cleaning routines seemed to work. Of course, now I can't get the god damn thing to print any color when it's hooked up to wireless. I keep trying to delete then re-install the driver software, but it keeps seeming to fail at the end. I saw there was an option to install via USB... but when I tried that, it didn't recognize the USB connection as valid during the installation routine! It just said "OK, now connect your USB cable", but it was already connected. Of course, at this point I tried to print and everything worked fine, including printing in color. So I re-ran the installation software, and it gave me an option to "convert a USB-connected printer to wireless". When I selected this... it failed. No more printer. So again I tried the 'install via wireless' option; again, it went to the end and seemed to fail (that is, it just ended on a webpage that said "Your software has been installed", but with no close button. And when I tried to close the tab, it gave the the message "your installation is not complete; hit continue to return to installation, or cancel to exit". If I hit "continue" it just took me back to the static "complete" page, and if I hit "cancel" it exited, the printer shows up in my list of printers, but it won't fucking print in color... only B&W!!! I hate printers. More on reddit.com