GitHub
github.com › mekanism › Mekanism › issues › 7115
Industrial Turbine not forming · Issue #7115 · mekanism/Mekanism
April 16, 2021 - I'm trying to build an industrial turbine but it's not forming. Photos below. I've built multiple different versions following YouTube tutorials, the FTB wiki, nothing is working. There have been no crashes associated with it, it's just not forming. Thanks for any help. https://www.reddit.com/r/feedthebeast/comments/mruba2/mekanism_turbine_not_forming_any_help_would_be/ Here is the Reddit post so attempted fixes can be seen.
Author mekanism
GitHub
github.com › mekanism › Mekanism › issues › 6829
Industrial Turbine Not Dumping Excess Steam · Issue #6829 · mekanism/Mekanism
December 30, 2020 - Apparently, industrial turbines are no longer dumping excess steam. The only option that works is dump, as dumping excess does nothing. ... Forge: Dedicated Server running 35.1.13 Mekanism: Mekanism-1.16.4-10.0.18.445 MekanismAdditions-1.16.4-10.0.18.445 MekanismGenerators-1.16.4-10.0.18.445 Other relevant version: Modpack: ATM6 v1.3.7
Author mekanism
Industrial Turbine Not Working 1.12.1
Issue description: Industrial Turbine Not working or not accepting steam Configuration Use: Created Smallest Config More on github.com
1
October 23, 2017Turbine issues
My turbine is set up properly and while it accepts steam it doesn’t produce any power and wont spin. I have the water output to a fission reactor and a steam input from the reactor and a boiler. It just fills with steam while doing nothing. More on github.com
1
March 27, 2021Turbines not spinning even with steam input (Dumping Excess on/off, nothing changes)
You need to make batteries the pic where you show the dumping exess on the right you can see that its full of energy, that shouldnt be the case, it should always be empty. So you should make induction cells so its always doing something More on reddit.com
9
3
April 28, 2025Mekanism Turbine Not Working
My turbine has a 5x5 fission reactor pumping steam into it, but the flow rate and production are bugging out, and the rotors will not increase their… More on reddit.com
3
1
December 3, 2022Why my turbine isn't working. : r/Mekanism
05:04
Industrial Turbine 🔌 Mekanism Tutorial 1.16 🔌 English - YouTube
33:22
INDUSTRIAL TURBINE! SURVIVING WITH MEKANISM E19 - YouTube
30:52
How to: Mekanism | Steam Turbine & Boiler (Minecraft 1.16.5) - YouTube
29:33
Surviving With Mekanism v10 :: E09 - Industrial Turbine - YouTube
r/Mekanism on Reddit: Why isn't my turbine working? (ATM 10)
Minecraft Forum
minecraftforum.net › home › minecraft forum › mapping and modding: java edition › minecraft mods › mods discussion › mekanism industrial turbine v10
Mekanism industrial turbine v10 - Mods Discussion - Minecraft Mods - Mapping and Modding: Java Edition - Minecraft Forum - Minecraft Forum
August 24, 2021 - Ok I've built it exactly as explained in the links above and it will not form.
Mekanism Wiki
wiki.aidancbrady.com › wiki › Industrial_Turbine
Industrial Turbine - Official Mekanism Wiki
Build the base out of turbine casings and optional structural glass. (must be square) [the perimeter must be casings not glass]
GitHub
github.com › aidancbrady › Mekanism › issues › 4786
Industrial Turbine Not Working 1.12.1 · Issue #4786 · mekanism/Mekanism
October 23, 2017 - Issue description: Industrial Turbine Not working or not accepting steam Configuration Use: Created Smallest Config
Author mekanism
GitHub
github.com › mekanism › Mekanism › issues › 7076
Turbine issues · Issue #7076 · mekanism/Mekanism
March 27, 2021 - My turbine is set up properly and while it accepts steam it doesn’t produce any power and wont spin. I have the water output to a fission reactor and a steam input from the reactor and a boiler. It just fills with steam while doing nothing.
Author mekanism
Reddit
reddit.com › r/mekanism › turbines not spinning even with steam input (dumping excess on/off, nothing changes)
r/Mekanism on Reddit: Turbines not spinning even with steam input (Dumping Excess on/off, nothing changes)
April 28, 2025 -
I'm running Mekanism 10.4 on Minecraft 1.20.1.
I have a fission reactor safely burning at 12 mB/t. I'm producing about 240,000 mB/t of steam.
I have two Industrial Turbines set up. They both receive steam correctly through Ultimate Pressurized Tubes.
Both turbines are set to "Dumping Excess," but neither of them spin at all.
Even if I disconnect one turbine and leave only the other connected (so it's receiving all the steam), it still just fills the internal steam tank but the rotor doesn't move.
Flow rate shows 0 mB/t, production is 0 FE, even though Steam Input shows ~240,000 mB/t entering.
Cooling setup:
I have 3 Creative Fluid Tanks each individually connected to different reactor coolant inputs.
I also have 4 more Creative Fluid Tanks connected together, plus about 20 electric pumps, all feeding into another separate coolant input.
That’s a total of 4 separate coolant inputs into the reactor.
Despite all of that, if I set the reactor above 12 mB/t burn rate, it still burns through all the water and starts overheating.
Also, when I connect both turbines at the same time, steam stops flowing to the big turbine almost completely and instead rushes into the small turbine first.
It’s like the small turbine is taking priority and stealing all the steam.
Any idea what could be wrong? Why isn't anything spinning even with dumping excess enabled and tons of steam being produced?
Top answer 1 of 4
3
You need to make batteries the pic where you show the dumping exess on the right you can see that its full of energy, that shouldnt be the case, it should always be empty. So you should make induction cells so its always doing something
2 of 4
2
It's not about the water. You're not outputting the energy the turbine generates to somewhere to store it, ideally an induction matrix. If energy out is full it won't consume any steam, which eventually will fill up and your boiler will stop producing steam, which mean it will stop consuming coolant, which eventually will fill up and your fission plant will stop making heated coolant (water or sodium)....and now you have a problem, because now there's nowhere for the heat to go except into the reactor itself, causing an overheat and a very messy explosion.
Reddit
reddit.com › r/allthemods › mekanism turbine not working
r/allthemods on Reddit: Mekanism Turbine Not Working
December 3, 2022 - View in app ... your turbine is full, i don't know if that matters but try putting an energy trash can with a flux point (priority -1) ... Over-full energy tank was the issue. Thanks! ... Dumb all. Decrease the injection rate of the reactor. ... ...
GitHub
github.com › mekanism › Mekanism › issues › 6121
Possible Bug with Industrial Turbines · Issue #6121 · mekanism/Mekanism
May 2, 2020 - Issue description: After upgrading to 1.15.2, it seems that Turbines can't be build anymore. After following construction steps from multiple sites (https://ftbwiki.org/Industrial_Turbine and h...
Author mekanism
Reddit
reddit.com › r/mekanism › why isnt my turbine forming?
r/Mekanism on Reddit: Why isnt my turbine forming?
February 18, 2024 - So (personally) I recommend a 5x5 square of coils in the middle, then saturating condensers around it. Instead of saturating condensers, you put turbine vents. That's why it's not forming
Reddit
reddit.com › r/feedthebeast › mekanism turbine not forming, any help would be appreciated! thanks so much.
r/feedthebeast on Reddit: Mekanism Turbine not forming, any help would be appreciated! Thanks so much.
April 16, 2021 - In my case the problem was the height of rotor shaft. You must respect the proportions.The length of the rotor column cannot exceed 2 x TurbineWidth - 1, where TurbineWidth is the interior diameter of the turbine (BaseWidth - 2)
Reddit
reddit.com › r/feedthebeast › [ftb:ie] turbine not spinning
r/feedthebeast on Reddit: [FTB:IE] Turbine Not Spinning
February 18, 2019 -
Hello, I'm sorry if this isn't the right place to ask, but I honestly don't know where else to ask.
My turbine for my reactor does not take in steam, and does not spin. It started spinning once, but only got to 25 RPM before it stopped completely. I followed a tutorial on YouTube to get the idea on how to build it, but it does not work for some reason.
Any help is appreciated.
Thanks!
Steam / Water Pipes + Aqueous Accumulator Water Input Turbine Interface [0 RPM / Empty Steam] Reactor Attached to Turbine Top answer 1 of 4
2
Your turbine seems to have trouble ejecting water. Try voiding the output water or disconnecting the aqueous accumulators (and and adding some buffer tanks) for true closed-cycle.
2 of 4
2
The turbine is full of waste (water). Make sure the water connection is set to output, and make sure your conduits have enough capacity to handle the throughput they need. You may need a servo to pump the water. You'll get a much easier time of it if you build the turbine directly adjacent to your reactor, and don't use any pipes or conduits at all to push the water and steam back and forth. Just make sure your input and output ports are all correct. Also, once you've filled the system with enough water, you can make it a closed loop system where no additional water needs to be added. I.e. once you've got the turbine and reactor running optimally, so long as you're not voiding the water in the turbine, you can remove the Aqueous Accumulators entirely.
Reddit
reddit.com › r/allthemods › [atm9] mekanism turbine not spinning
r/allthemods on Reddit: [ATM9] Mekanism turbine not spinning
December 17, 2024 -
When i turn on the fissule reactor, the turbine don't spinning and fill up with steam, dont generating energy
Reddit
reddit.com › r/allthemods › turbine not forming (mekanism)
r/allthemods on Reddit: Turbine not forming (mekanism)
December 7, 2023 -
Hey first time trying to make an industial turbine. As far as i can tell i havent done anything wrong could someone help?
Top answer 1 of 5
3
Makanisims turbine is very painfull to setup gl to figure out whats wrong
2 of 5
2
It looks like you have an extra layer of casings on top. Usually the turbine vents start one block from the top frame. Worth noting that if you hover over a turbine block in JEI, they have the ponder option (hold W) which shows a great visual of the structure.
Reddit
reddit.com › r/feedthebeast › mekanism industrial turbine problem
r/feedthebeast on Reddit: Mekanism Industrial Turbine problem
April 17, 2022 - I Built 3 fission reactors and Turbine (The smallest one) because i needed much power, but steam level in turbine stops at 192,616 mB, and it wont go…
Reddit
reddit.com › r/feedthebeast › mekanism industrial turbine not working
r/feedthebeast on Reddit: Mekanism industrial turbine not working
July 19, 2023 - I was using the industrial turbine and all of the sudden it stopped producing rf and the flow rate was zero, it was working before, any ideas on how…
Reddit
reddit.com › r/feedthebeast › mekanism steam turbine doesn't seem to be working. help?
r/feedthebeast on Reddit: Mekanism Steam Turbine doesn't seem to be working. Help?
January 3, 2018 - Steam in bottom, water out top for mek turbine (though you do not have to pump it out at all) Second it seems like you might not have vents across the turbine top, or you didn't leave area above the vents to allow it to become water again.
Reddit
reddit.com › r/allthemods › my mekanism turbine is not working and i cant figure out why
r/allthemods on Reddit: My mekanism Turbine is not working and I cant figure out why
June 2, 2021 - From what I know, the turbine Blades should never touch the glass while spinning. The Top Layer looks like it could not spin freely. I dont know if thats actually the case, but It would be worth a try. My friend made another mekanism graph, this time for ore processing
GitHub
github.com › mekanism › Mekanism › issues › 6008
Industrial Turbine · Issue #6008 · mekanism/Mekanism
March 30, 2020 - Maybe im dumb and searching has failed me, but i cant seem to extract power from an industrial turbine. the universal power cable does not connect to the turbine valve. i tried using the configurator to force it but it still will not connect. the turbine itself sparkled red and i can open the turbine stats and production menu and the pressurized tube im using for steam also connects to the other valve i have correctly. also, likely unrelated, im using a reactor to supply steam, but once the turbine fills with steam it stops producing and just sits there, setting from idle to dumping excess does not resolve this. the build contains 8 blades, 5 coils, 8 dispersers, and 33 vents. Forge: 31.1.23 Mekanism: 9.9.16.408 Other relevant version: 1.15.2
Author mekanism
Reddit
reddit.com › r/feedthebeast › mekanism turbine reactor not outputting water into fission reactor
r/feedthebeast on Reddit: Mekanism Turbine Reactor not outputting water into Fission Reactor
January 3, 2023 - Vents output automatically and mekanism pipes work with throughput of (total capacity of pipe mb/t) which is like 10x higher than pipe can push/pull by itself) Edit: 10x more with a single pipe block I mean, if you add more pipes in line you can multiply that by number of blocks ... I would also like to mention the rotors aren’t spinning at all in the industrial turbine, but I have max power as shown.