The answers already provided do include all the necessary steps, just not in a single answer, so here goes (assumes you have already installed Git, which seems to be the case based on your question):
git clone https://github.com/vrai/fdspatch
cd fdspatch
make
This will report the warning about tempnam that you are already aware of, as stated elsewhere, this is a warning, not an error; the program will still run.
Let's prove the binary you have just built works, from the same fdspatch directory run:
./fdspatch
As we didn't provide any of the expected parameters, this will show the help file of the tool. If you're happy only being able to run this command from the fdspatch directory, there's no further action needed.
If you want to be able to run the fdspatch command from anywhere, you'll need to copy it to the systems binary directory (this IS documented on the project's github page, but the details are left to the reader...)
Assuming you're on the latest Raspberry Pi OS, this should work (again, assumes you are still in the fdspatch directory):
sudo cp fdspatch /usr/local/bin
You can then run the fdspatch command anywhere on the system.
All of the above has been tested and and shown to work on a RPi4 on latest Raspberryb Pi OS.
Answer from Phil Robinson on Stack ExchangeHow do I install this software from GitHub?
How to download packages from github?
I'm embarrass to ask but how do you download and install stuff from github?
software installation - How to install packages from git - Unix & Linux Stack Exchange
The answers already provided do include all the necessary steps, just not in a single answer, so here goes (assumes you have already installed Git, which seems to be the case based on your question):
git clone https://github.com/vrai/fdspatch
cd fdspatch
make
This will report the warning about tempnam that you are already aware of, as stated elsewhere, this is a warning, not an error; the program will still run.
Let's prove the binary you have just built works, from the same fdspatch directory run:
./fdspatch
As we didn't provide any of the expected parameters, this will show the help file of the tool. If you're happy only being able to run this command from the fdspatch directory, there's no further action needed.
If you want to be able to run the fdspatch command from anywhere, you'll need to copy it to the systems binary directory (this IS documented on the project's github page, but the details are left to the reader...)
Assuming you're on the latest Raspberry Pi OS, this should work (again, assumes you are still in the fdspatch directory):
sudo cp fdspatch /usr/local/bin
You can then run the fdspatch command anywhere on the system.
All of the above has been tested and and shown to work on a RPi4 on latest Raspberryb Pi OS.
The readme provides the instructions for installing this:
To build fdspatch on a Unix style system (including Linux and OS X), simply run make. This will produce the fdspatch binary that can be copied to the system's standard binary directory if required.
Hello
I don't know how to proceed with the installation of this program. https://github.com/nikita-yfh/OpenLayout
I'm using Linux Mint on Virtualbox.
I used Xubuntu as my main system for nine months, but I always installed something using a .deb package or sudo apt-get install.
What I managed so far was to install cmake and git
I made the clone of the project.
I did sudo apt install libwxgtk3.0-gtk3-dev
mkdir build
cd build
the rest of the commands I don't know how to proceed.
Should I download the package, extract it in the build folder and run the terminal from there?
If anyone can help me I appreciate it
Hello, noob here
Often when I'm searching for a specific feature/package I find myself at a github repo. But sometimes they don't have detailed instructions on how to install the package. Do I apt-get, do I wget, I don't really know. I've google'd but everyone seems to give different answers. I'm wondering if there isn't really a go to method?
More specifically, I'm trying to get this package, I've cloned the repo in a directory but don't know what to do next, I'd appreciate any help :)
https://github.com/jcs/xbanish
I'm not used to arch because it's my first time. I am trying to install a bunch of emulators on my laptop. The discover app is not working and it can't download anything. I did use the terminal and I was able to download emulators like dolphin, ppsspp, desmume and mgba. The 3ds and playstation 1-3 are the ones left, and they're in github. Also what are the commands on the terminal if you want to delete all of the file?
Edit* thanks y'all
To compile the source code you cloned, issue make in the project directory. To "install", you would copy the resulting executable ARP_Spoofing to any directory in your $PATH; or just leave it where it is and execute it from that directory as ./ARP_Spoofing.
Ideally you would read the C++ source prior to running the resultant executable.
In general, if you are cloning a git repository, then it is most likely that you are downloading source code, which you will need to compile before you can install and use it. For many packages, this will mean running the following commands:
./configure
make
make install
It is recommended to run the first two commands as an unprivileged user and the last one as the superuser (root).
There are also some useful guides on the web for compiling software, such as this one.
However, that package you link to looks very simple and it doesn't seem to follow those general instructions above. It looks like just running ./ARP_Spoofing (possibly with one of the listed options) from the source or installation folder should work. There is also a simple makefile in there, so if you wanted to re-compile it, it looks like you can just run:
make clean
make
First, install the package git:
sudo apt-get update
sudo apt-get install git
At the link you gave, there is a green button marked Clone or download. Click it and then click the clipboard icon. This will copy the git link to your clipboard. Now, back to the terminal:
git clone https://github.com/golemfactory/golem.git
cd golem/Installer/Installer_Linux
./install.sh
You can install it as follow:
wget https://raw.githubusercontent.com/golemfactory/golem/develop/Installer/Installer_Linux/install.sh
chmod +x install.sh
./install.sh
See : Installation on Ubuntu
The officially supported release is 16.04 at the moment.
Hi!
I’m excited to introduce PackHub (https://github.com/mominul/packhub), a project written in Rust that allows you to install Linux packages directly from GitHub Releases!
PackHub dynamically creates virtual Linux package repositories (for apt, dnf, yum, etc.) on the fly, pulling packages straight from GitHub. No need for developers to maintain pakage repositories separately or reach to package repository maintainers to get their project enlisted, just uploading their linux packages (deb, rpm) is enough! And regular users can install or update the package through the dynamically created package repository by PackHub.
Key Features
Smart Package Selection – Automatically detects your Linux distribution and picks the most compatible package.
Example: If a release contains a package named flameshot-12.1.0-1.ubuntu-22.04.amd64.deb, it will be selected for Ubuntu 22.04.
Automatic Updates – When a new GitHub release is available, PackHub updates the repository metadata so that apt update or dnf update fetches the latest package version.
Secure & Reliable – Supports HTTPS transport and OpenPGP signing for repository metadata.
How to Use PackHub
To install a package from a GitHub repository through PackHub, simply run a script to set up the PackHub repository in your system’s package manager.
This script:
-
Configures the GPG keys
-
Adds the PackHub repository URL for the GitHub repository to your package manager
Replace OWNER with the repository owner’s name and REPO with the repository name.
For example, for https://github.com/sindresorhus/caprine, use:
OWNER: sindresorhus
REPO: caprine
If you're unsure, visit packhub.dev to generate the correct command for your repository.
Ubuntu-Based Distributions
wget -qO- http://packhub.dev/sh/ubuntu/github/OWNER/REPO | sh
Debian-Based Distributions
wget -qO- http://packhub.dev/sh/debian/github/OWNER/REPO | sh
Fedora
wget -qO- http://packhub.dev/sh/yum/github/OWNER/REPO | sh
openSUSE
wget -qO- http://packhub.dev/sh/zypp/github/OWNER/REPO | sh
Once the PackHub repository is set up, you can install packages using your system’s package manager (apt, dnf, yum, etc.).
If this sounds useful, please star the repo on GitHub ⭐ to show your support! Feedback, questions, and contributions are always welcome.
Thanks in advance!
I am new and I have no idea how to install programs from github. I come from mircrosoft and here everything starts with some .exe, but here if I download any program in github I don't know which file is the installation file. heeellpp pls.
have a great day. im use ubuntu