Access installation guidance and resources from James Hardie for a successful siding installation.

Miller Dodson Associates, Inc. is one of the leading firms in the Reserve Study field, serving community associations, resorts, country clubs and golf courses, religious institutions, and educational facilities.

Find products meeting construction specifications, get datasheets, do submittals, and get building material price quotes, RFQs, from local suppliers.

Hitachi® HARDIBLADE® w/4 PCD Diamond Teeth. Call Hitachi® at 800-546-1666 for nearest dealer. SNAPPER SHEAR™ electric, pneumatic, or hand shear. Call 800-297-7487 for tool information. ... CABO One-and-Two Family Dwelling Code Section 703.2.1. NOTE: Some Building Codes exempt the use of weather-resistive barriers over · “water-repellent panel sheathing” or exterior panels classified as “weather-resistive · barriers”. James Hardie recommends the use of “building paper type” weather-

Work with the #1 siding contractor in Denver. Scottish Home Improvements offers James Hardie, LP Siding, Diamond Kote & more! Get a quote on siding in Denver!

James Hardie siding and trim products can be installed over braced wood or steel studs spaced at a maximum of 24 in. on center or directly to 7/16 in. thick OSB or equivalent sheathing. These products can also be installed over solid-foam insulation board up to 1 inch thick.

Artisan lap siding by James Hardie. This document is intended for use by · builders, cladding installers, and other contractors who may be involved with

used result in an installation that is code compliant. Consult ESR 1844 and ESR 2290 or other applicable, local code compliance documentation for guidance on fastener selection and placement to achieve design wind loads for the · specific James Hardie siding product, framing type, building ...

HardiePanel vertical siding can be installed over · braced wood or steel studs, 20 gauge (0.836 mm) minimum to 16 gauge (1.367 mm) maximum, spaced a maximum of 610mm (24 in) o.c · • Consult ESR1844 for fastener schedule as well as additional technical information at www.jameshardiecommercial.com.

Consult the “Exterior Wall Drainage ... PLANE (E.G. DRAINABLE WRB) ... RAINSCREEN (MIN. 3/8 IN. AIR GAP)3 ... Position fasteners 3/8 in from panel edges and no closer than 2 in away from corners. Do not nail into corners. • HardiePanel vertical siding must be joined on ...

Welcome to the Forest Products Supply/F.P. Supply website. We are a leading wholesale distributor of building materials in the Midwest with some of the largest inventories in the market. Our products range from general commodities to specialty products such as PVC, Composite Decking, and Engineered ...

Consult James Hardie Technical Services if you are ... • NOTE: Whenever a structural member is present, HardiePlank should be fastened with even spacing to the structural member. The tables allowing direct to OSB or plywood · should only be used when traditional framing is not available. ... Panels for sidewall ...

Blind Nailing is the preferred method of installation for HardiePlank® lap siding products. Face nailing should only be used where required by code for high wind areas and must not · be used in conjunction with Blind nailing (Please see JH Tech bulletin 17 for exemption when doing a repair).

Please turn on javascript to use this feature. Thanks · How Detroit's Large-Scale Businesses Generate Jobs

used result in an installation that is code compliant. Consult ESR 1844 and ESR 2290 or other applicable, local code compliance documentation for guidance on fastener selection and placement to achieve design wind loads for the · specific James Hardie siding product, framing type, building height, wind exposure category and other factors relevant to your project.

Download James Hardie Shingle Siding Installation Instructions pdf.

• These instructions to be used for single family installations only. For Commercial / Multi-Family installation requirements go to www.JamesHardieCommercial.com · • HardiePanel ® vertical siding can be installed over braced wood or steel studs spaced a maximum of 24" o.c.

JavaScript is disabled in your browser · Please enable JavaScript to proceed · A required part of this site couldn’t load. This may be due to a browser extension, network issues, or browser settings. Please check your connection, disable any ad blockers, or try using a different browser

We cannot provide a description for this page right now

Construction industry leading facades and timber-product solutions for every customer, project, budget and vision. Brick, cladding, timber, masonry and…