Playing on ATM 9 TTS and using it to produce brine but i feel like it's not enough, how to max the output of this thing?
currently have 330 mB/tSo i´ve been trying to research the max height of that plant and couldn´t find anything. no Video no Wiki or forum entry. nothing. so i´ma go and ask here. what´s the max height i can build em in the MC version of 1.12?
best way to heat up thermal evaportation plant mid game? just started making tier 3 ore factory
Trying to max out my tritium production to directly pump DT fuel into the fusion reactor. I heard somewhere max height is 18 but I dont know the other 2 dimensions. I also wanna know how much this will output per tick so i know if i need multiple.
I made one that was six blocks high. Temperature went up to 304K, fine. I then put a resistive heater next to it, powered it, temperature still 304K. Changed the amount of power used at best to 1kRF, but the temperature in the TEP stayed at 304K even after I had waited for the heater to heat up. Tried changing the placement of the heater and using the conductive things, nothing. Had an extreme reactors reactor, so power generation wasn't a problem. I also changed the TEP's controller's position to be as high as possible, nothing changed.
Plenty of water in the plant too.
Only thing that made a difference in brine generation was the height of the plant, with generation being 0.06mb/t at 3 blocks high and going up by 0.02mb/t per every layer added.
I'm playing in 1.12.2, no particular modpack.
Hello everyone,
I have some problems with the Thermal Evaportation plant.
I'm using Mekanism for Minecraft 1.20.1, and I can't figure out how to optimize the brine tower.
The tower is 18 blocks high, with the 4 solar panels, there is a resistive heater, configured at 480FE/t and produces 484K
From what I understand, the production ratio is 10:1, 10mb of water for 1mb of brine. Is this ratio correct?
The tower produces a maximum of 1080mb/t of brine. So it's supposed to consume 10,800mb/t of water.
Assuming this ratio is correct, we have 11 pumps, each producing 1000mb/t, giving us a production of 11,000 mb/t of water. This should be enough to fill the tower's water buffer. We find that this is not the case.
Is there anything I should know about resistive heaters? The brine tower seems to be capping at 1080mb/t, whereas its temperature seems to be able to be raised well above the temperature needed to produce the 1080mb/t of brine.
What are your setups? Have you somehow managed to produce a constant 1080mb/t brine, even at night?
Thank you very much for your answers.
How does this even work? I've increased the height of it, which according to the wiki should increase the max temperature. But I have 2 plants next to each other, with different heights, and they're at max temperature, and it's the same for both of them. 3.02k degrees C.
The controller is detecting the extra height, but the max temperature isn't rising. The wiki also mentions a "multiplier" but I can't see it anywhere. I'm in a canyon from biomes o plenty if that makes a difference.
I'm heating them up with resistive heaters attached to the valves, because it seems to be the only way to keep production going at night and making solar panels is expensive. But I was having the same problem with solar panels attached.
What temperature do I need to produce enough brine/lithium to keep a fusion reactor running? And how many evaporation plants?
I've followed like six tutorials and for some reason, it just is not turning on. I've tried building in creative mode, and there just is no luck. I've:
- added the four solar panels to the top
- left the top open
- switched the pumps to pull (they won't enter the valves though)
- made it both 18 blocks tall (and 4 blocks tall)
I just have no clue what I'm doing wrong. The picture below has it extended into the ground just to hide it. This one is in my creative world cause I'm just troubleshooting.