June 2, 2020 - They're sending me a replacement, included these instructions: https://solutions.moen.com/Article_Library/Kitchen_Handle_Side_Mount:_Slide_On_Dome More replies ... J’ai eu Moen au téléphone - la référence du «dôme» est 141797. Ça coûte ~50$ sans les frais de livraison. Par contre, je ne sais pas si ça va corriger durablement le problème · my mom tried to fix the faucet.

Moen kitchen faucet 5995 or 7594 the top of the faucet separated from the bottom, yes, Not sure how to do that. I see ... Hi. The handle, secured by the set screw, is tight. However, the brass fitting that the cartridge fits into is loose. The exterior of this fitting is threaded and appears to be secured by a lock ring on the outside.

September 5, 2025 - Q: What tool do I need to tighten a Moen faucet handle? A: Typically, an Allen wrench (hex key) of 1/8" or 3/32" size is used. Always check your faucet’s manual for the correct size. Q: Can I fix a loose kitchen faucet handle myself?

If your handle was loose and not detached, just take out your old screw with the screwdriver in counter-clockwise rotation, and replace it with a new one, following the steps mentioned.

September 8, 2025 - A: You’ll typically need an Allen wrench (hex key) or a Phillips screwdriver, and potentially a small flathead screwdriver to remove any decorative caps. Q: Can I use plumber's tape when tightening the handle?

Answer: It seems many Moen single-handle kitchen faucets use a plastic piece that is prone to breaking, and when it does the handle suddenly has a lot of play. Thankfully the replacement is cheap and readily available, the hard part is determining the exact part you need. Go to the Moen website a...

Advice and instruction on Pumps, Tanks and Well Water systems, installation, repair and replacement.

I have a Moen Kitchen Faucet, one handle, pull out. The faucet has become loose, seems that a mounting gasket at the

The screw is a 3/32 allen size. Don't over-tighten. You may want to wiggle the handle slightly as you tighten the screw to ensure that you are centered up on the stem. All else fails, talk to Moen, the faucet has a lifetime warranty and they may want to send you a new handle and setscrew.

First, remove the handle and inspect the set screw for damage; replace it with a stainless steel screw if needed. Clean the handle’s interior and stem to ensure a snug fit. Applying a small amount of thread locker can help maintain tightness.

The blog post, entitled How to Tighten a Loose Moen Single Handle Kitchen Faucet Base, guides readers through the process of fixing a loose Moen faucet basin as well as giving the step-by-step instructions of how to fix a loose Moen kitchen faucet handle. Readers in need of How Tos on either of these subjects can view the newest blog post by clicking here. The How to Do it Yourself with Video Chat a Pro resource section, better known as DIYwVCAP, is a collection of How To articles on a variety of subjects. The fields covered by DIYwVCAP include plumbing, auto repair, electrical repair, HVAC maintenance, irrigation installation and appliance repair.

April 11, 2025 - This article will explain one of the most common handle assemblies referred to as a Slide on Dome. This mechanism was introduced in 2008. This faucet style utilizes a 1255 and the 4000 cartridges (Cartridge is based on model number). The water supply shut off valves must be turned off- see article · How to Turn Off the Water Supply to the Faucet. ... solutions.moen.com and select the type of product you are repairing.

December 11, 2022 - Allen key hole that needs to be removed and the hand assembly will come off. Inside there is a plastic nut that tights the valve assembly to the rest of the tap. Tighten that and reinstall the handle.

October 15, 2023 - Reinstall new stems and handles to complete the repair. For a loose handle on a pull-out sprayer style Moen faucet, start by using an adjustable wrench to tighten the set screw located just below the front of the handle.

October 7, 2020 - The parts breakdown will show the location of the handle screw for your model). After the plug button or handle cap has been removed, use a 7/64" hex wrench to remove the handle screw.

April 11, 2025 - This is usually found underneath the handle or on the back. Use an Allen wrench or a screwdriver to tighten this screw. Be careful not to overtighten, as this could damage the handle.