Hi,
My setup:
-
Motherboard: MPG B650i Edge Wifi
BIOS:e7d73ams.130by05/24/2023 -
CPU: Ryzen 7600X
-
RAM: G.Skill DDR5 32GB (2x16GB) 6000Mhz Flare X5
(F5-6000J3238F16GX2-FX5)
Issue:
In short, I'm currently running my RAM at 4800MHz because my PC freezes when I enable EXPO. I'm curious about the RAM and BIOS you have.
Additional context:
I've noticed several stability improvements in the latest BIOS updates, but I'm uncertain about which one to try.
I reached out to MSI support, and they suggested installing version 7D73v181 (Beta). However, I haven't found much information about this version.
Additionally, when checking the QVL on G.Skill's website, it confirms compatibility between the motherboard and RAM. However, on MSI's website, this particular RAM model is not listed.
Any insights or advice on which BIOS version to try would be greatly appreciated.
MSI B650I EDGE WIFI - update BIOS with Flash Button not working
Anyone else with MSI MPG B650I ? BIOS update 7D73v115 seemed to have killed (1) USB port on mine
I got MSI B650 GAMING PLUS WIFI, what BIOS version should I install in this case?
B650 Edge WiFi - bios update
Videos
I built a new PC (with cable management and all that), but when I turned it on, the CPU and DRAM lights were on. After googling, I started trying to update the BIOS, but no matter what I did, it didn't help. Red LED either solid or stop flashing after few seconds
What I have tried:
-different version (7D73v19 and 7D73v1A)
-different names (original and MSI.ROM)
-5 different USB flash drives
-different formatting (FAT32/NTFS and MBR/GPT)
-with and without CPU and RAM
-different RAM slots (one by one)
-clear CMOS button
Hi, I just built a new machine with the 7900X3D and MSI MPG B650I
I was able to install Windows, everything seemed to work fine, devices connected to USB ports seemed to work fine. While downloading drivers I noticed the BIOS update 7D73v115 was available. The patch notes say:
- AGESA COMBO PI upgrade to PI-1.0.0.5c. - Support new CPU.
I assumed that meant it's to support the X3D processors because the only other BIOS file available 7D73v10 is from 2022-10-11 and preceded the X3D processors. Update went through without a hitch.
After rebooting to Windows, my MX Master 3 stopped working (the model I had preceded the current model with the bolt receiver). I had the receiver connected to the red USB port above the Flash BIOS one in this image.
Cue all the troubleshooting steps; rebooting, resetting BIOS settings, connected various devices to every other port, everything works on every else except that one port. Anyone else experience weirdness with 7D73v115 or have other ideas? I don't believe I can downgrade either.
These are the most recent versions available in the official website:
Version: 7E26v1F1 (Beta version) - Release date: 2024-07-09
Version: 7E26v1E - Release date: 2024-07-01
Which one should I install? I have no idea