June 1, 2022 - For headsets with a On and Off button, start with the headset powered off and hold the Power button down for 5–6 seconds until the light starts flashing. ... Put your computer, phone, tablet, or other device into pairing mode.

Answer (1 of 4): I am not sure if it is a Bluetooth headset or a wired headset as you did not mentioned about it, but anyways you can connect a Bluetooth headset by pairing the Bluetooth of your headset and the laptop you can do so by typing Bluetooth in the search bar of your laptop, just click ...

That's it! Now you know how to pair your Plantronics Voyager headset, a process that works similarly across many modern Bluetooth earpiece devices. The Plantronics BT600 USB dongle is very small and needs to be plugged directly into a laptop or computer to get it set up properly.

November 8, 2023 - If you don’t see the red/blue ... 5-6 seconds until you see the red/blue flash. Plug into Computer. Plug the Bluetooth USB adapter into the computer....

All current Plantronics Bluetooth headsets fall into one of three categories: headsets that have a single button for call control and power, headsets that have a sliding on/off switch, and headsets that have a on/off button. Instructions for each are provided below. Note that some legacy/obsolete headsets are exceptions to this rule. Those headsets are listed at the bottom of this article and are linked to their specific pairing ...

... 3. Long press the small circular ... of the USB will start blinking Red and Blue. 5. On the headset, slide the Bluetooth button upwards to enter pairing mode....

June 6, 2024 - And as you are still trying to connect the headset to your PC, you can try with APU 75 and 76, Poly cannot guarantee this will work as this model was designed to be used with desk phone.

Answer: Is your Plantronics headset a blue-tooth headset? If it isn’t, you don’t. Both the headset and the thing that you want to use to drive it must be blue-tooth devices. Then you have to “pair” them. Pairing is kind of mysterious. You tell one of the devices to look for devices that it recogn...

Skip to main contentSkip to search · Powered by Zoomin Software. For more details please contactZoomin · ©2025 HP Development Company, L.P · Privacy · Accessibility · Terms · Trademarks

November 6, 2025 - Release the button once the light alternates between red and blue - this indicates pairing mode is active. Open Settings › Bluetooth › Pair new device. Select your Plantronics headset from the list and tap it to connect.

September 3, 2024 - Turn on your headset and rest it comfortably on your head. Press and hold the Bluetooth pairing button on the headset base unit for 4 seconds until the Bluetooth LED flashes red and blue.

To connect the Plantronics Voyager 5200 UC headset to your PC or laptop, follow these steps: 1. Plug the Bluetooth USB adapter into a USB-A port on your laptop or PC. 2. Turn on your headset by pressing and holding the power button until you hear "Power on" and the headset LEDs flash red and blue.

July 2, 2025 - Pairing the Voyager 5200 Headset (Also applies to Voyager 5200 UC) 1) To pair your Voyager 5200, turn the headset on. Slide the power switch to the 'on'

August 13, 2017 - Your headset should appear in the list of Bluetooth devices (something like this 00-0c-00-0c-00-00, there will be other digits of course)))) ... Cuchemassoff's responsewas almost right - it's not the answer/call button to hold to enter pairing mode - you need to hold the Power button (above the answer/call button) in (after turning it on). Once I did this, the red/blue lights flashed and I was able to pair from my Macbook Pro.

If not, put the headset in pairing ... the headset · You will need to go into the computer settings and set Plantronics BT600 as the default device to direct the computer sound to your headset....