September 22, 2025 - Join the strips with diagonal seams and trim the seam allowance to 1/2 inch. Fold the bias strip around the cord and use a zipper foot to sew in place. The welting will go around the bottom of the seat apron.

August 26, 2025 - To apply the welt, arrange it along the edge of the seat and staple the welt's lip (the flat edge). Only the rounded edge with the cord inside should show when you turn the chair over.

December 13, 2023 - Note any screw holes the fabric has covered, and be sure to remove it. This will allow you to reassemble the chair more easily. Position your cording along the back edge of the backrest.

January 13, 2022 - Face the front of the chair, and insert your “backing” fabric facing away from you inside the top back part of the chair, and staple it in place. Place the foam and batting in front of it, then the front fabric layer and carefully staple ...

May 23, 2020 - There are tons of YouTube videos on this, but the gist of cording is to cut diagonal strips from your fabric (this is what they call ‘on the bias’) and sew these end to end to make a long strip of fabric. Place your cording in the middle of these strips, and sew the fabric around the cording with your secret weapon.

August 18, 2014 - While I don’t have many pictures of this part, all chairs are different so you can figure your particular chair as it is set up. I made double cording, also called welting, to glue onto the parts where the fabric met the chair.

February 5, 2021 - Use a zipper foot to sew the welting in place. ... Sew the piping into the fabric panel. Place the panel on the chair and pin it in place. Mark where the piping should go, and then pull the panel off.

March 7, 2023 - Step 9: Sew cotton cording into binding by placing cording in the middle and folding binding over. Use a zipper foot to get seam as tight as possible. Step 10: Pin the piping to top raw edge of interior back.

January 23, 2016 - Sew Method: Sew the strips right sides together, end to end, to make one long narrow chain of fabric. No-Sew Method: Add a narrow bead of hot glue across the end of one strip. Place another strip on top making sure right sides are together.

August 17, 2012 - In addition to the main piece of ... seat, you will also need enough fabric-covered welt cord to go around the edge of the seat, plus a long strip of fabric, about 5 or 6 inches wide, long enough to go around the outside of the chair seat...

August 7, 2021 - After cutting the fabric, I went to the sewing machine to sew my piping. I used all the old cording since it was in good shape. Also, I sewed all the connecting fabric pieces together before I started assembling onto the chair.

January 11, 2016 - Back in October, my 22 y/o daughter Andrea came to me and said "Mom I need you to help me reupholster some dining chairs as a Christmas gift for my mother-in-law".

July 26, 2024 - A long narrow chain of fabric wraps around a cord, which can be constructed by sewing or using hot glue. Using your glue gun, start attaching the welting to the corner where your cushion is against the back of the chair.

August 24, 2025 - I didn’t see that part. Did you glue it on after the chair was finished? Thank you! 😀 ... Thank you! There is no cording….it just looks like there is 🙂 I folded the fabric to create a “seam” and then pulled extra tight and stapled the bottom where the staple would be hidden.

I added cording around the top layer of the rocking chair cover. Trying to replicate as close as I could to how the original chair was put together. I really like the fact that I added the cording. It looks finished with it.

Once the fabric was secure on the chair, I then had to do some finishing touches. I decided to go a super easy route with this one. I have done double welt cording before, and single. But I liked the idea of just having some white rope as the cording.