ryzen master curve optimizer blue screen

Auto curve optimizer is not reliable. It sets too high values and sort of guesstimates like Hydra tool. You're better off doing curve optimizer the old fashion way. It's tedious and long but it's the only way to guarantee stability. You don't want auto settings making you think it's fine and then days later you start randomly rebooting at idle or light loads.

I have completed twice with all my bios stuff left as is. It actually overides what it needs to at least on my gigabyte board, 5900x here. Running it again with defaults just to see. It is very optimistic in the CO settings. Edit Note once you use it you cannot make any changes in the bios or boot loop. (Once you activate RM CO optimizer certain further manual changes within the bios can lead to boot loops that conflict with the hidden RM bios changes) Second note if you also have RM in the Radeon software, you can not factory reset Radeon drivers without RM kept within Radeon aka Radeon slim. It did actually provide some positive results I am validating with the CPU L3 cache. It did give me easy strong MT and ST performance, but could get the same manually but not with the L3 cache performance uplift. So in short still testing, the last 3 or 5% take much longer then it shows but it is doing an all core validation at that point. I also got different results for the first 2 runs.

Linus Tech Tips

linustechtips.com › the workbench › troubleshooting

BSOD after using Curve Optimizer on Ryzen Master - Troubleshooting - Linus Tech Tips

May 3, 2023 - https://linustechtips.com/topic/1486821-bsod-after-using-curve-optimizer-on-ryzen-master/ More sharing options... Followers 2 · Go to solution Solved by Skynet5, February 8, 2023 · I got it working I just had to be really fast to open Ryzen Master to disable settings.

reddit.com › r/overclocking › used ryzen master curve optimizer and my pc keeps crashing

r/overclocking on Reddit: Used ryzen master curve optimizer and my PC keeps crashing

December 3, 2023 -

I have a Ryzen 7 5800x and a Aorus Gigabyte B450m pro wifi motherboard, Windows 11. I recently upgraded to the new CPU and have been using it for a couple weeks. I decided to use Ryzen Master to use to auto optimize for the CPU. It took about an hour and I think it blue screened at one point. But when it was complete I hit apply and it went to rest the PC. When it did, the Aorus screen comes up like it it's booting and the blue screens and says it has to restart. When it restarts, it says its going to repair but then crashes again. It just starts doing this over and over. I tried putting the bios into safe mode but that didn't do anything. Please someone help. I'm fairly new to this stuff.

Try taking the cmos battery out of ur motherboard to reset ur bios, if ur cmos battery is in a super inconvenient place some motherboards have pins u can place something metallic on to jump the bios reset, read ur motherboard manual and it should tell you about both options

In my experience with the 5800x, the results of Ryzen Masters auto per core and all core optimizations were pretty unstable. I’d back everything off 5-10 and use a program like OCCT. The core cycler was pretty good at helping me find a few cores in particular that were way off and then I had to tweak the offsets down even further to prevent the occasional random crashing.

YouTube

youtube.com › watch

AMD Ryzen Master Bluescreen while curve optimizing #amd #pcgaming #pcbuild #world - YouTube

00:40

Sprawdz jaka ciekawa anomalia na AMD Ryzen Master - bluescreen:) @miss-gadget

Published April 17, 2025

Tom's Hardware Forum

forums.tomshardware.com › home › cpus

Question - Ryzen Master Curve Optimizer | Tom's Hardware Forum

September 6, 2024 - You have to be careful though, Too much of an negative offset can make the CPU or cores unstable, and you may not even see it, but you may just have random things crash every now and then, or a random BSOD out of nowhere even though a stress test was fine for hours, I got BSOD's at idle if I had 1 core that was unstable, or I had issues once with Windows update, I thought windows just being windows, it was the Curve optimizer messing with something.

reddit.com › r › AMDHelp › comments › 17darsy › my_pc_keeps_bsod_after_ryzen_curve_optimizer

我的電腦在Ryzen Curve Optimizer 重啟後一直BSOD。

We cannot provide a description for this page right now

AMD Community

community.amd.com › t5 › pc-drivers-software › ryzen-master-per-core-optimizer-now-bsod › td-p › 592438

Ryzen Master/Per core optimizer now BSOD - AMD Community

March 10, 2023 - These would also continue to boot loop. I spent days trying to trouble shoot this, even saw JayzTwoCents was having a similar issue with his new 7950X3D build. He was getting the same blue screens as me. Anyway, long story short it turns out the issue is with the core offset values by Ryzen Master.

Overclock.net

overclock.net › home › forums › amd › amd cpus

Ryzen Master Troubleshooting help | Overclock.net

October 19, 2024 - Hey guys currently running a 5900x with a dark hero viii on a water loop. I have been trying for three days to successfully run curve optimizer from Ryzen master but everytime on the last core at between 97-99% it blue screens or reboots and when i relaunch the software the optimizer is reset...

AMD Community

community.amd.com › https://www.amd.com/en.html › amd community updates

Ryzen Master Warnings instability - AMD Community

February 29, 2024 - BUT TLDR version... it created instability and blue screen of death later on when not even stressing the system. I believe that if you want true stability its best to stay away from the optimizers and auto oc's. Hopefully i don't have any serious damage to my cpu. I have turned off the curve optimizer so far and will see if i get another BSOD.

HP Support Community

h30434.www3.hp.com › t5 › Desktop-Boot-and-Lockup › Ryzenmaster-curve-optimizer-cause-repeat-bsod › td-p › 8879695

Ryzenmaster curve optimizer cause repeat bsod - HP Support Community - 8879695

October 2, 2023 - Tried ryzenmaster curve optimizer, per core, let it run, then applied its settings. Now the pc goes from bsod to bsod, i cant even get to recovery options before it bsods

Find elsewhere

Google Bing Mojeek

Asus

rog-forum.asus.com › t5 › gaming-motherboards › rog-x670e-gene-blue-screen-issues-pbo-curve-optimizor › td-p › 1015142

ROG X670E GENE blue screen issues PBO Curve Optimi... - Republic of Gamers Forum - 1015142

May 7, 2024 - Greetings, I have a X670e Gene, A 7800x3d, Gskillz 6000 CL30 Expo kit. I also own a B650e ITX ROG Strix board. On the x670e Gene if I even touch PBO, say Neg 5 all core. within 10 minutes I get a blue screen. On the b650e I can run a negative 30 all core and never blue screen. Same ram (literally...

reddit.com › r/amd › new using the curve optimizer (auto optimizer) in ryzen master. how accurate is this?

r/Amd on Reddit: New using the curve optimizer (auto optimizer) in Ryzen Master. How accurate is this?

August 29, 2022 - 5800X is one of the poorer samples, -1 negative CO for all cores can get me a blue screen. There is one core that will always crash with -1. Auto CO optimization in Ryzen master suggested -30 for all cores, needless to say I crashed as soon as I loaded chrome.

reddit.com › r/amdhelp › i tried optimization curve, and now my pc keeps restarting

r/AMDHelp on Reddit: I tried optimization curve, and now my pc keeps restarting

September 7, 2025 -

So in the amd ryzen master app, i tried the optimization curve on all cores. After waitingnfor an hour for it to be fully optimized, i applied it. My pc restarted and then everytime i got into my home windows screen it will just restart again and then the blue screen came out in which to choose F1, F8 or Esc. Tried everything on that blue screen but nothing works. What should i do now? I cant even open up ryzen master to disable the optimization curve. CPU: Ryzen 7 5800 X RAM: 32 GB DDR4 3200MHZ GPU: RX 9060XT 8GB PSU: 600W MOTHERBOARD: AORUS X570I WIFI

Take out the ram sticks as this will reset the settings in your bios. If that doesn't work, turn off computer and remove the tiny battery on the motherboard. Wait 30seconds then slip it back in. All settings are reset after doing this.

Ryzen master probably used max or close to max -30 value for undervolting, you can find PBO in bios and set curve optimizer to lower value like -15, once you boot just disable it in ryzen master and delete that crappy program lol. Most cpus can get -20, you can try -15 first, use program like cinebench or prime95, for 15-20 minutes to make sure it doesnt crash

Hardware Canucks

hardwarecanucks.com › home › forums › pc builders & tweakers corner › overclocking, tweaking and benchmarking

Ryzen Master - Auto Curve Optimizer | Page 2 | Hardware Canucks

April 19, 2022 - I upgraded my BIOS (F36c) which is AGESA 1.2.0.7 and now I can't even manage to complete a run of the Ryzen Curve Optimizer... starts to BSOD near the end and eventually gives up in resuming. Kinda disappointing, wonder if it's an issue with Ryzen Master or the way the BIOS behaves.

reddit.com › r/amdhelp › my pc keeps bsod after ryzen curve optimizer restart.

r/AMDHelp on Reddit: My pc keeps BSOD after Ryzen Curve Optimizer restart.

October 21, 2023 -

I did a curve optimization for all cores of my cpu with ryzen master curve optimizer. After waiting for it to finish and restart all I’m greeted with is a blue screen and restart into another blue screen. I can access bios but idk what I can do from here. Any help is appreciated.

Isn't that what the ryzen master said.. That it will restart multiple time. It didn't state how it would restart.

1 of 2

2 of 2

In bios reset to defaults

reddit.com › r/amdhelp › installed ryzen master and ran curve optimizer

r/AMDHelp on Reddit: Installed Ryzen master and ran curve optimizer

November 5, 2023 -

Since I installed Ryzen Master and ran curve optimizer last night my PC has been playing up.

1st it would keep rebooting to blue screen with we've ran in to some issues but this cycle kept up every time I tried to get into safe mode

Eventually managed to get into safe mode and reset to earlier date.

PC boots up (slowly though compared to before)now ok but may restart again in the process.

Now restarts Everytime I tried to load anything.

I ran sfc scannow which said it fixed things

This is my first build so complete noob.

I am at a complete loss why Ryzen master would mess up my PC

pchelpforum.net › t › after-ryzen-master-curve-optimization-no-post-dram-orange-cpu-damaged.86339

1 of 1

I suggest uninstalling Ryzen Master and doing all of your system tuning in your motherboard's BIOS/UEFI.

I am at a complete loss why Ryzen master would mess up my PC

RM does the same things you can do in BIOS, but it's through software running inside Windows. That's always going to have a higher chance of causing bugs and instability than just doing the settings in the BIOS.

My 5700X also played badly with Curve Optimizer. Even going -5 on a few cores would eventually cause a BSoD or a restart. I figured it's because my B450 board is very conservative with the voltages so going even lower with CO is impossible.

Eventually I just turned off CO and applied a -0.05v offset to the core voltage. Also set PPT/EDC/TDC to values in between the defaults for 5700X and 5800X. Ended up stable and with 5800X performance.

PC Help Forum

PC Help Forum

May 6, 2023 - Reliable support and optimization tips for the world’s most widely used Windows version.

AMD

amd.com › content › dam › amd › en › documents › products › software-tools › faq-curve-optimizer.pdf pdf

FAQ - Curve Optimizer Feature in Ryzen Master What this feature is all about?

is introduced in the latest Ryzen Master release (Build # 2.9.0.2093). The primary functionality of this feature is to ... tune the AVFS curve of the entire CPU or specific cores of the CPU such that the tuning overrides the fixed curves that they are fused with, resulting in an ... Yes, both CPU and the internal graphics can be optimized...

reddit.com › r/overclocking › ryzen master with out curve optimizer

r/overclocking on Reddit: Ryzen Master with out curve optimizer

January 9, 2025 -

Ryzen Master with out curve optimizer

Hey guys. I recently installed the ryzen master and it does not show the “curve optimizer mode” option. In advanced mode it does not show some other options. I will leave some screenshots. Anyone knows why? Thanks

What motherboard do you have?