Pair Your Remote with Your Adjustable Base · Instructions for Ease 3.0 models:

Step 1: Identify the label on the back of your remote. ... Child Lock is easy!

Please read the following instructions before attempting to pair. Step 1: Please ensure your base remote has fresh batteries. Step 2: Unplug the base Power Cord from your power outlet.

Ensure that your remote batteries are properly installed or do not need replacing.

Ensure that the remote control is paired with the bed base.

Plug the remote into the USB charger, using the USB cord. Make sure the connection is tight. The first charge should be for about 5 hours to ensure full power. If this doesn’t work, check your power outlet to make sure you have power.

Tempur-Pedic · Troubleshooting · Adjustable Bases · Ease® 2.0 Power Base · Step 1: Press and hold the FOOT UP and FOOT DOWN buttons together for approximately six (6) seconds, or until the remote backlight flashes twice.

If your Tempur-Pedic bed remote shows lights but doesn’t work, first reset the remote by removing batteries for 5 minutes. Check the infrared sensor on the bed base for dust or obstructions.

Premier Reset and Remote Pairing Instructions · Please ensure that all instructions are read thoroughly prior to beginning

To reset your Tempur-Pedic Ease 3.0 remote, follow these steps: 1. Press and hold the FLAT and STOP buttons simultaneously on the remote control for 10-15 seconds. 2. Release the buttons after the specified time. 3. The remote control should now be reset. After resetting the remote, test all ...

Pair Your Remote with Your Adjustable Base · Instructions for the following base models:

Before purchasing, please troubleshoot the control box and verify the old remote control product number (this number can usually be found in the battery compartment) If you are not sure,pls provide more details information about your bed & control box & old remote control & manual to us ,so we can check the correct item for you

If your Tempurpedic remote blinks but the bed won’t respond, first check the IR sensor on the bed for obstructions or dirt. Replace batteries with fresh, high-quality ones and ensure correct polarity.

Tempur-Pedic · Troubleshooting · Adjustable Bases · Ease® Power Base · Step 1: Press and hold the HEAD DOWN and ZERO-G buttons together for approximately three (3) seconds. Step 2: Press and hold the HEAD UP and ZERO-G buttons together ...

My Tempur-Pedic remote control keeps flashing twice every time I attempt to use it. I've replaced the batteries, turned off the base and then back on again, and tried the child safety lock trick by holding down the up-and-down buttons on the feet simultaneously, but that didn't work. Can you please assist me? ... Hello. I notice ...

Replacement Tempur-Ergo Ease Wireless Remote Control *PLEASE NOTE: Wireless remote is designed for the Tempur-Ergo Ease 2.0, 3.0 & 4.0 bases only. This will not work with other bases. Click here to identify these specific bases' remotes. If your remote does NOT look this, this replacement remote will not work.…

If there is no light, verify that ... electrical surge protector is recommended).Remote · Ensure that your remote batteries are properly installed or do not need replacing.Ensure Child Lock feature is not enabled....

Not to scale. For illustration purposes only. Read all instructions before beginning installation · A Sync Cord is included with the base. Not available on Queen, Full or King/Cal King size bases · The Sync Cord connects the two control boxes to a single remote for the synchronization of two bases