🌐
Reddit
reddit.com › r/homeimprovement › vinyl siding - correct j-channel size?
r/HomeImprovement on Reddit: Vinyl Siding - Correct J-Channel Size?
April 2, 2022 -

I purchased lengths of vinyl siding and j-channel from Home Depot. The siding measures 1/2" overall depth and the j-channel has a 5/8" slot, leaving about 1/8" of play. Is this size discrepancy okay? I have a 5/8" siding sample and it fits much nicer in the 5/8" j-channel, so I'm a little concerned. These sizes of siding and j-channel seem to be the only ones that Home Depot offers in this color and it's a popular color (Khaki) so I'm thinking maybe this is the expected combo from their perspective, but I'm not sure.

tldr; is 1/2" siding in a 5/8" j-channel okay?

🌐
DIY Home Improvement
diychatroom.com › home › forums › home improvement › roofing/siding
Vinyl Board & Batten Siding Installation | DIY Home Improvement Forum
You'll use the same or similar frieze board on top and you may need 7/8" j channel for the bottom. So you are sure you want to put a third design on the front of the house? Horizontal vinyl, vertical RB&B, and stone?
🌐
Exterior Solutions
exteriorsolutions.com › p-1004-15-j-channel-carton-88-linear-feet
1.5" J-Channel for Foundry Vinyl Siding w/ Foam Insulated Backer - Exterior Solutions
1.5" J-Channel Carton (88 linear feet)
Used when installing siding with Fullback Insulated Foam Backer.
Price   $99.99
🌐
CertainTeed
certainteed.com › installing-vertical-siding
Installing Vertical Siding
Overlap the J-Channels 3/4". Prepare for the second course by applying head flashing above the just-installed J-Channel. Then nail J-Channel over the flashing to receive the upper panel.
🌐
Home Improvement Supply
homeimprovementsupply.com › p-9691-certainteed-58-inch-vinyl-j-channel.aspx
CertainTeed 5/8 Inch Vinyl J Channel
CertainTeed 5/8 Inch Vinyl J Channel
The CertainTeed 5/8 Inch Vinyl J Channel provides a fully-finished look by hiding the cut ends of the siding. The J Channel can be installed at the corners, doors, windows, and many other frames and comes in many different color options that can work with any siding.The CertainTeed 5/8 Inch Vinyl J Channel is compatible with the listed styles such as, CertainTeed Restoration Classic, CertainTeed Board and Batten, CertainTeed Mainstreet, CertainTeed Wolverine American Legend, and CertainTeed Encore Vinyl Siding only. This J Channel is exclusively compatible with the CertainTeed Perimeter Triple
Price   $402.22
🌐
Buildsite
buildsite.com › pdf › certainteed › Board-Batten-Vinyl-Siding-Installation-Instructions-2898991.pdf pdf
Board & Batten Vinyl Siding - Installation Instructions
NOTE: If you plan to use J-Channel instead of inside corner- posts, remember to double this measurement and add the ... Vinyl siding cannot be installed on a radius wall.
🌐
MittenBP
mittensiding.com › blog › 5-key-points-for-installing-board-and-batten-vertical-vinyl-siding
5 Key Points for Installing Board & Batten Vertical Vinyl Siding - Blog - Mitten Building Products
To allow for necessary water runoff, cut and bend this top portion down over this side of J-Channel. For ease of application, vertical installations should start at a corner. Fill the channel of the corner by nailing down a strip of board 2” wide.
🌐
Scottishhomeimprovements
scottishhomeimprovements.com › wp-content › uploads › 2019 › 04 › Cranboard-Solid-Core-Vinyl-Siding-Installation-Manual-denver.pdf pdf
SOLID CO E SIDING R ® Installation Manual
Install 1-1/8” J channel as you would other vinyl J channels nailing every 8” to 12”. Make sure you create water diversion tabs on both ends of the top channels. CRANEBOARD® BOARD AND BATTEN INSTALLATION · TIPS · BOARD & BATTEN VERTICAL INSTALLATION ·
Find elsewhere
🌐
Contractor Talk
contractortalk.com › home › forums › trade talk › carpentry › windows, siding and doors
Vinyl board and batten siding questions | Contractor Talk - Professional Construction and Remodeling Forum
If any of you have done B&B vinyl, what is to say you can't lap it just like horizontal, I am thinking a couple of quick cuts so it can lap just like horizontal. The B&B only comes in 10' lengths.
🌐
PEPA
polymericexteriors.org › installation › installation-manual › vertical-siding-installation
How to Install Vertical Vinyl Siding | Polymeric Exteriors
Position the top edge of a J-channel or vertical base along the previously snapped chalkline. Remember to drill minimum 3/16” (4.8mm) diameter weep holes no more than 24” (610mm) apart (Fig. 53). Fasten every 8” to 12” (203mm to 305mm). Use the center of the nail slots.
Published   April 23, 2025
🌐
Reddit
reddit.com › r/homeimprovement › j-channel at the bottom of siding
r/HomeImprovement on Reddit: J-Channel at the Bottom of Siding
July 19, 2020 -

Hi everyone,

The bottom of my house's siding has a j-channel as opposed to z-flashing or a drip-cap. The j-channel constantly stores water that drips from the siding above, and there is no exit point...

My home inspector suggested that a temporary solution would be to drill small holes at the bottom of the j-channel to allow water to escape.

Should I also add caulking to seal the gap at the top of the j-channel as well? This way, only water that gets behind the siding will escape through the drilled holes.

Please click here to see images.

Thanks for the help!

🌐
YouTube
m.youtube.com › watch
DIY: How to install vinyl board and batten siding
Share your videos with friends, family, and the world
Published   November 8, 2022
🌐
DoItYourself.com
doityourself.com › doityourself.com community forums › exterior improvement center › exterior paneling and all exterior sidings › vinyl board and batten siding
Vinyl board and batten siding - DoItYourself.com Community Forums
May 10, 2006 - Sorry a little hard for me to explain clearly so you may want to check out this site. which has some basics. http://www.dixieline.com/vinylsiding/vinylside1.html ... This is vertical board and batten siding.The bottom of each piece will have to be retained by something which I thought would be a J-channel type piece.
🌐
Home Improvement Supply
homeimprovementsupply.com › p-9461-certainteed-vertical-board-and-batten-vinyl-siding.aspx
Shop CertainTeed Vertical Board and Batten Vinyl Siding
CertainTeed Vertical Board and Batten Vinyl Siding
The CertainTeed Vertical Board and Batten Vinyl Siding blends classic charm with modern durability. Inspired by early settler designs, this board and batten siding features a flat face board for a smooth, even surface and a TrueTexture rough cedar finish molded from real wood. Available in Single 7-inch and Single 8-inch vertical siding panels, its half-inch batten height creates a bold, eye-catching look. Ideal for whole-house or accent applications, this board and batten siding is virtually maintenance-free and never needs painting. The PermaColor color science ensures long-lasting, fade-res
Price   $237.04
🌐
Reddit
reddit.com › r/homebuilding › vertical vinyl siding
r/Homebuilding on Reddit: Vertical Vinyl Siding
June 24, 2024 -

Hi everyone,

We recently finished our build, and while the process was mostly great, our siding experience was less than desirable. The crew rarely showed when they said they would, and their work wasn’t what I would consider up to par.

Since the install of vertical siding on the front of the house, we’ve had consistent issues with “bubbling” in areas. Initially, it was only a few pieces, and the company sent the crew back up to replace them. The same ones bubbled again, and the company said they would no longer replace them.

Fast forward a month or two, and nearly all the siding is bubbling. From your experience, what is could be causing this, and what recourse do I have? The company has already been paid.

A little background:

The company is a large exterior company in a local city. The installers are one of their subs. The company provided the material and the subs to install. This was not a crew that my builder chose.

🌐
YouTube
youtube.com › watch
Board and Batten Installation Tips - YouTube
AboutPressCopyrightContact usCreatorsAdvertiseDevelopersTermsPrivacyPolicy & SafetyHow YouTube worksTest new featuresNFL Sunday Ticket · © 2025 Google LLC
Published   June 16, 2022
🌐
YouTube
m.youtube.com › watch
How To Install Board And Batten Vertical Vinyl Siding
Share your videos with friends, family, and the world
Published   July 12, 2021