Videos
We are adding a large addition to home shortly, and they are replacing the siding of the home in the process. I would really like to have the vertical lined siding I.e. board and batten instead of the horizontal traditional vinyl siding we currently have, but only if we can do it budget friendly, otherwise we will just go with traditional siding. Wondering what options there are and how much more it would cost to do it, if anyone has compared prices recently.
To me, board and batt means the larger board goes on first and the smaller board (batt) goes on second and laps the edges of each board. Likewise, reverse board and batt means the small board (batt) goes on first and the larger board goes on second and covers the spaces between the batts.
Over the years, we've learned that using plywood for the "board" and just installing batts at regular spacing on the plywood will give the same affect as "board and batt" siding...for less cost and fewer problems because the "boards" are wide and tend to split (check).
I'm not sure I've ever seen (or understand) how reverse board and batt works with plywood. Seems like installing large boards on the plywood with small spaces between them would defeat the purpose (and cost effectiveness) of the plywood.
In any event, both systems are installed on a moisture barrier, like building paper, etc. This is essentially your moisture covering over the walls and the wood board and batt (or reverse board and batt) is just to keep the moisture barrier protected. Protected from wind blowing off the paper, UV protection, etc...
So, just as @isherwood says, you don't need to "seal" the vertical joint. It will be covered by the batten, or in your case, covered by a board.
By the way, we've learned to extend the moisture barrier about 1" past the bottom plate so water doesn't run out the bottom and blow back up under the bottom plate. If you live in a high wind area you'll want to put a felt pad between the plate and the top of the concrete stem wall to make a better seal against wind blown rain.
Also, we've learned NOT to caulk the bottom of the board and batt to the horizontal Z metal. Rather, we want that moisture to run out. After all, we know the board and batt (or whatever is above the metal) will leak. That's why we install a moisture barrier under the siding. If you caulk...you'll get dryrot on the bottom of the siding that sits on the Z metal. (We use a peel and stick membrane to seal the metal Z flashing to the upper moisture barrier.)
Isn't the OP asking about plywood RB&B, a Douglas Fir plywood product that is textured to look like Reverse Board and Batten?
As such, the vertical seam between two sheets is not covered by a board or batten, unless battens are added over the indented "reverse battens". A batten or board over the seam defeats the aesthetics of the RB&B.
So, the question remains, of what to do with the vertical seam. Is the house wrap under the plywood enough to limit moisture infiltration, dry rot around the edges? It's probably a good idea to "pre-stain" (weather-proofing stain) the siding on both sides, or at least around the edges, before installing it.
Im not a pro—hell, Im not even really a hobbyist! I used to build things with my dad when I was younger and we had a dual sliding compound miter saw that I learned to use when I was maybe too young to learn how to use a miter saw.
I like to go down ADHD rabbit holes. And I’ve been seeing a TON of board and batten over the last 5-7 years and I want to know the proper composition and utility for it. But all I can find is cheap DIY projects that are clearly not really board and batten—they are simply people gluing MDF to the wall and thinking it’ll look good in a year (not to mention they aren’t matching trims, and their verticals are hanging over their baseboards). This is infuriating.
So where do I find this info? Isnt their supposed to be a veneer “board” that the verticals and/or horizontals are supposed to “batten”…? I’m so sick of people thinking they are an artist when they are finger painting a coloring book.
I’m not even saying I’d take up doing it, I just want to know.