Actuation point 0.2-0.5 Press 0.15-0.3 Release 0.15-0.6 I use 0.2/0.2/0.3 Rapid trigger obviously on Continuous rapid trigger on Tachyon mode on edit years later after having gotten even better at speed: i would recommend 0.5-1.0 for actuation point now, and rapid trigger at 0.3-0.7 (same for both press and release) continuous rapid trigger should definitely be on, tachyon mode doesn't really matter though i think <0.5 actuation point ended up causing some doubletaps for me mostly on jumps so i would suggest something slightly higher (i use 0.8 now), this doesn't matter much for streams anyway since continuous rapid trigger kicks in and really low rapid trigger i.e. 0.15 is good for really high bpm streams (300+) but on lower bpm stuff i would occasionally get accidental overstreams just from slightly changing my hand posture etc, i found that around 0.3 was the lowest i could reliably use without that happening, on the other hand above 0.7 i noticed some of my keypresses not registering when playing 280+, at least with my technique and the movements i have gotten used to performing over the years definitely mess around with your settings a bit and try out different stuff but these should be good guidelines Answer from Goatlov3r3 on reddit.com