May 30, 2025 - This tool is used to release the backrest from the locking levers on each side of the chair, and then re-secure it after you’re done. Expert Tip: "A slotted or flathead screwdriver works best for this job, as it allows you to easily lift the locking levers without damaging the upholstery or frame," says Jason Nernburg, our La-Z-Boy delivery supervisor in Ottawa. If you're wondering, “What tools do I need to fix a La-Z-Boy power recliner ...

May 25, 2023 - Tighten any loose screws or bolts that connect the backrest, seat, or footrest to the frame. Ensure that the tracks or glides that guide the movement of these components are aligned and free of obstructions or dirt.

Answer (1 of 3): If its the frame a local upholsterer should be able to fix it. If its the mechanism it is a little more difficult to fix. Mechanisms are put together with industrial rivets.

September 3, 2022 - But really the whole extension mechanism all the way to the back seems to be at-fault. ... A few ideas. 1) As @Baluncore mentioned, the linkage near the end footrest sure looks confused. Try starting with the assembly in the 'closed'/'retracted' position. Then have someone pull strenuously on that last footrest while starting the 'recline' procedure in the normal fashion.

September 18, 2025 - Flip the chair over and locate the moving parts and joints. Apply a small amount of lubricating oil to these areas, then work the reclining mechanism back and forth to distribute the oil.

January 15, 2021 - Brackets in the back of your chair can become loose over time, and so while we have the back disassembled, what we wanna do is tighten the screws on both brackets to make the chair more secure.

August 23, 2021 - Just run the mechanism back and forth and watch at all the joints as you do it. If you have any super mechanically minded friends have them look as well. Check the floor underneath for screws, too. ... The leg rest mechanism on my recliner chai hits on the bottom frame when opening and closing. Its because it shifted over time from leaning one way to grab the lever to open the leg rest. How can I fix it?

January 26, 2025 - Contractor's Assistant: Do you have the original hardware that came with the chair, or will you need new hardware as well? Customer: I have everything intact, but I want a soft, plain seat, and of course, all new foam and brown fabric. Contractor's Assistant: Is there anything else the Expert should know before I connect you? Rest assured that they'll be able to help you. Customer: No, I just want to see... also, my bottom is short, and this seat is too short for back support.

November 24, 2019 - The best way to fix this is to never buy lazy boy again. Their quality has tanked in the last 10-15 years. ... Couldn’t agree more, and their customer service has matched their build quality. Continue this thread · Wife's gonna kill me. Is this chair ruined or can I fix it?

October 20, 2025 - Learn effective methods on how to repair a broken recliner back with our easy DIY tips and tricks for fixing reclining furniture.See more videos about How to Fix Broken Back Bracket on Lazy Boy Electric Recliner, How to Fix Broken Back Panel of Cabinet, How to Fix A Broken Recliner Arm, How to Fix A Broken Slingback, How to Fix Your Recliner If The Hidden Lever Is Broken, How to Fix A Recliner That Leans Back Too Far.

January 16, 2025 - It reclines to almost a horizontal position. The issue is it doesn't come all the way up in the back. The footrest retracts all the way. The back comes up about 8" short of vertical. I lubricated the mechanism and tightened all the screws. This is a fully manual chair with no lever.

July 11, 2025 - An uncomfortable recliner chair can often be fixed by making a few adjustments. Changing the pressure required to recline the back of the chair can help make your recliner just right for you. Adjusting the position of the chair when...

April 7, 2025 - Can’t get the chair to recline, do not have an account, yes Does power lift need to be ... Disclaimer: The customer and expert messages presented herein may have been altered or modified to enhance readability and safeguard the privacy of individuals. These modifications do not change the intent or substance of the original messages. ... Recliner backs often stick or bolts become hard to remove during disassembly.

That made the lumbar support a bit more stout, and now my lower back never ends up sagging into the frame. I think it was definitely worth the effort. At the very least, I saved a couple of hundred dollars compared to the brand-new chairs I was looking at, and this chair is much better for me. Most of the new chairs that I looked at were too small for me. With this Lane Summerlin recliner, I don’t have to slouch to lean on the armrests, like I do with many recliners.

Tighten any loose bolts on the frame and check the spring tension inside the mechanism. If the chair won’t recline, the release cable may be stretched or detached—reconnect or replace it.

July 7, 2021 - If the chair is not that old did it come with a warranty? Check because then you can call the company and the store and they will have it fixed for you. If not go to an Auto store like Autozone and get a leather repair kit. That should work although not the prettiest solution.

November 5, 2024 - The majority of recliners come standard with the lever being on the right side of the chair.

October 15, 2021 - He had me text him a picture of the bottom and he said the issue is that the middle wire is broken. Apparently it's supposed to loop through that black piece on the middle right which causes that piece to catch hooks (not pictured) so it stays locked in the reclining position. Fortunately it's a pretty easy diy fix!

October 31, 2025 - Reset the Touch Buttons (for Touch Models): Unplug the DIN plug from the control box, wait 10-20 seconds, and plug it back in to reset the buttons. Recalibrate the Control System: If needed, unplug the recliner and manually adjust the chair’s position to recalibrate the system.