Having trouble with my Hustler zero turn.
About a months ago I hopped onto the mower and started it, and I noticed it was hard to start. The next week I went to use it and it wouldn’t start- just crank crank crank so it turns over but never actually fires up. So far I have changed the carburetor, including the fuel solenoid, spark plugs, fuel lines to the fuel pump fuel pump, fuel pump, oil, and gas. After changing fuel pump and hoses and carburetor, when trying to start, it does the same thing. Carburetor bowl fills up with gas just never starts even with starting fluid. I have messed with the auto choke by manually choking. Still, no luck. Any advice would be helpful. Thank you.
Kohler Command turns over and backfires but won't start - DoItYourself.com Community Forums
kohler cranks but wont start - DoItYourself.com Community Forums
Kohler engine hard to start | BobIsTheOilGuy
Kohler Command 23 no start
Videos
I have an JD l130 -Kohler Command 23 with a no start issue. It's sputtered and came back a few times and then died.
It cranks healthily. Tried to bump it with some starter fluid and it didn't even try to start with that.
Pulled both spark plugs and they both Arc blue to the engine. Appears to have good compression. Ran like a champ before this.
I'm wondering if the coil could be bad but not fully failed?
Any thoughts you have would be greatly appreciated! Thank you
I’ve got a miller welder with a Kohler here that turns over fine, has spark, new fuel lines, new fuel and oil filters along with a fresh change, new diaphragm pump and new carburetor but still no start. While it’s turning the engine will start to show some smoke from the exhaust but it can’t ever seem to kick over and start. We’ve put new gas in it, it’s getting fuel through its carb and has no blown fuses of any sort on the electrical end. Any ideas as to what could make it quit like this?