Hello, I'm sorry if this isn't the right place to ask, but I honestly don't know where else to ask.

My turbine for my reactor does not take in steam, and does not spin. It started spinning once, but only got to 25 RPM before it stopped completely. I followed a tutorial on YouTube to get the idea on how to build it, but it does not work for some reason.

Any help is appreciated.

Thanks!

When i turn on the fissule reactor, the turbine don't spinning and fill up with steam, dont generating energy

I'm running Mekanism 10.4 on Minecraft 1.20.1.

I have a fission reactor safely burning at 12 mB/t. I'm producing about 240,000 mB/t of steam.

I have two Industrial Turbines set up. They both receive steam correctly through Ultimate Pressurized Tubes.

Both turbines are set to "Dumping Excess," but neither of them spin at all.
Even if I disconnect one turbine and leave only the other connected (so it's receiving all the steam), it still just fills the internal steam tank but the rotor doesn't move.

Flow rate shows 0 mB/t, production is 0 FE, even though Steam Input shows ~240,000 mB/t entering.

Cooling setup:

• I have 3 Creative Fluid Tanks each individually connected to different reactor coolant inputs.

• I also have 4 more Creative Fluid Tanks connected together, plus about 20 electric pumps, all feeding into another separate coolant input.

• That’s a total of 4 separate coolant inputs into the reactor.

Despite all of that, if I set the reactor above 12 mB/t burn rate, it still burns through all the water and starts overheating.

Also, when I connect both turbines at the same time, steam stops flowing to the big turbine almost completely and instead rushes into the small turbine first.
It’s like the small turbine is taking priority and stealing all the steam.

Any idea what could be wrong? Why isn't anything spinning even with dumping excess enabled and tons of steam being produced?